BCM43353LIUBGT Datasheet, PDF (97/143 Pages) Cypress Semiconductor – Single-Chip 5G WiFi IEEE 802.11ac MAC/Baseband/Radio with Integrated Bluetooth 4.1 for Automotive and Industrial Applications

BCM43353 Data Sheet
Bluetooth RF Specifications
Section 14: Bluetooth RF Specifications
Unless otherwise stated, limit values apply for the conditions specified in Table 24: “Environmental Ratings,” on
page 93 and Table 26: “Recommended Operating Conditions and DC Characteristics,” on page 94. Typical
values apply for the following conditions:
• VBAT = 3.6V
• Ambient temperature +25°C
Figure 31: Port Locations for Bluetooth Testing
BCM43353
WLAN Tx
BT Tx
WLAN/BT Rx
RF Switch
(0.5 dB typical insertion loss)
Filter
Antenna
Port
Chip
RF Port
Port
Note: All Bluetooth specifications are measured at the chip port unless otherwise specified.
Table 27: Bluetooth Receiver RF Specifications
Parameter
Conditions
Minimum Typical Maximum Unit
Note: The specifications in this table are measured at the chip port output unless otherwise specified.
General
Frequency range
RX sensitivity
–
GFSK, 0.1% BER, 1 Mbps
/4–DQPSK, 0.01% BER,
2 Mbps
8–DPSK, 0.01% BER,
3 Mbps
2402
–
–
–
–
–93.5
–95.5
–89.5
2480
–
–
–
MHz
dBm
dBm
dBm
Broadcom^®
November 14, 2014 • 43353-DS104-R
Page 96