BCM43353LIUBGT Datasheet, PDF (65/143 Pages) Cypress Semiconductor – Single-Chip 5G WiFi IEEE 802.11ac MAC/Baseband/Radio with Integrated Bluetooth 4.1 for Automotive and Industrial Applications

BCM43353 Data Sheet
Generic SPI Mode
Status
The gSPI interface supports status notification to the host after a read/write transaction. This status notification
provides information about any packet errors, protocol errors, information about available packet in the RX
queue, etc. The status information helps in reducing the number of interrupts to the host. The status-reporting
feature can be switched off using a register bit, without any timing overhead. The gSPI bus timing for read/write
transactions with and without status notification are as shown in Figure 24 and Figure 25 on page 65. See
Table 13 on page 65 for information on status field details.
Figure 24: gSPI Signal Timing Without Status (32-bit Big Endian)
Write
cs
sclk
mosi
Write-Read _cs
sclk
mosi
miso
Read
cs
sclk
mosi
miso
CC3311 CC3300
CC11 CC00 DD3311 DD3300
DD11 DD00
Command 32 bits
Write Data 16*n bits
CC3311 CC3300
CC00
Command
32 bits
Response
Delay
DD3311 DD3300
DD11 DD00
Read Data 16*n bits
CC3311 CC3300
CC00
Command
32 bits
Response
Delay
DD3311 DD3300
DD00
Read Data
16*n bits
Broadcom^®
November 14, 2014 • 43353-DS104-R
Page 64