BCM43353LIUBGT Datasheet, PDF (43/143 Pages) Cypress Semiconductor – Single-Chip 5G WiFi IEEE 802.11ac MAC/Baseband/Radio with Integrated Bluetooth 4.1 for Automotive and Industrial Applications

BCM43353 Data Sheet
Bluetooth Power Management Unit
Packet Loss Concealment
Packet Loss Concealment (PLC) improves apparent audio quality for systems with marginal link performance.
Bluetooth messages are sent in packets. When a packet is lost, it creates a gap in the received audio bitstream.
Packet loss can be mitigated in several ways:
• Fill in zeros.
• Ramp down the output audio signal toward zero (this is the method used in current Bluetooth headsets).
• Repeat the last frame (or packet) of the received bitstream and decode it as usual (frame repeat).
These techniques cause distortion and popping in the audio stream. The BCM43353 uses a proprietary
waveform extension algorithm to provide dramatic improvement in the audio quality. Figure 7 and Figure 8 show
audio waveforms with and without Packet Loss Concealment. Broadcom PLC and bit-error correction (BEC)
algorithms also support wideband speech.
Figure 7: CVSD Decoder Output Waveform Without PLC
Packet Loss Causes Ramp-down
Figure 8: CVSD Decoder Output Waveform After Applying PLC
Audio Rate-Matching Algorithms
The BCM43353 has an enhanced rate-matching algorithm that uses interpolation algorithms to reduce audio
stream jitter that may be present when the rate of audio data coming from the host is not the same as the
Bluetooth audio data rates.
Broadcom^®
November 14, 2014 • 43353-DS104-R
Page 42