BCM43362SKUBGT Datasheet, PDF (62/84 Pages) Cypress Semiconductor – Single-Chip IEEE 802.11™ b/g/n MAC/Baseband/Radio + SDIO

BCM43362 Data Sheet
WLAN RF Specifications
Section 11: WLAN RF Specifications
The BCM43362 includes an integrated direct conversion radio that supports the 2.4 GHz band. This section
describes the RF characteristics of the 2.4 GHz radio.
Note: Values in this document are design goals and may change based on device characterization results.
Unless otherwise stated, the specifications in this section apply when the operating conditions are within the
limits specified in Table 12: “Environmental Ratings,” on page 58 and Table 14: “Recommended Operating
Conditions and DC Characteristics,” on page 59. Functional operation outside these limits is not guaranteed.
Typical values apply for the following conditions:
• VBAT = 3.6V
• Ambient temperature +25°C
Figure 23: RF Port Location
BCM43362
WLAN Tx
T/R RF Switch
(0.5 dB Insertion Loss)
WLAN Rx
Filter
Antenna
Port
RF Port
Chip
Port
Note: All specifications are measured at the RF port unless otherwise specified.
Broadcom_®
February 13, 2015 • 43362-DS106-R
IEEE 802.11 b/g/n MAC/Baseband/Radio + SDIO
Page 61
BROADCOM CONFIDENTIAL