CY8CTMG200-32LQXI Datasheet, PDF (44/309 Pages) Cypress Semiconductor – Technical Reference Manual (TRM)

RAM Paging
4.2.6 MVW_PP Register
Address
Name
0,D5h
MVW_PP
Bit 7
Bit 6
Bit 5
Bit 4
Bit 3
Bit 2
Bit 1
Page Bits[2:0]
Bit 0
Access
RW : 0
The MVI Write Page Pointer Register (MVW_PP) sets the
effective SRAM page for MVI write memory accesses in a
multi-SRAM page PSoC device.
Bits 2 to 0: Page Bits[2:0]. These bits are only used by the
MVI [expr], A instruction, not to be confused with the
MVI A, [expr] instruction covered by the MVR_PP regis-
ter. This instruction is considered a write because data is
transferred from the microprocessor's A register (CPU_A) to
SRAM.
When an MVI [expr], A instruction is executed in a
device with more than one page of SRAM, the SRAM
address that is written by the instruction is determined by the
value of the least significant bits in this register. However,
the pointer for the MVI [expr], A instruction is always
located in the current SRAM page. See the PSoC Designer
Assembly Language User Guide for more information on the
MVI [expr], A instruction.
The function of this register and the MVI instructions are
independent of the SRAM Paging bits in the CPU_F register.
For additional information, refer to the MVW_PP register on
page 238.
4.2.7 Related Registers
■ CPU_F Register on page 32.
44
PSoC CY8CTMG20x and CY8CTST200 TRM, Document No. 001-53603 Rev. *C
[+] Feedback