PSOC4200M Datasheet, PDF (16/42 Pages) Cypress Semiconductor – Programmable System-on-Chip

PSoC^® 4: PSoC 4200M Family
Datasheet
Electrical Specifications
Absolute Maximum Ratings
Table 1. Absolute Maximum Ratings^[1]
Spec ID# Parameter
Description
Min Typ Max Units Details/Conditions
SID1
SID2
SID3
SID4
SID5
BID44
BID45
BID46
V_{DD_ABS}
V_{CCD_ABS}
V_{GPIO_ABS}
I_{GPIO_ABS}
I_{G-PIO_injection}
ESD_HBM
ESD_CDM
LU
Analog or digital supply relative to V_SS
(V_SSD = V_SSA)
Direct digital core voltage input relative
to V_SSD
GPIO voltage; V_DDD or V_DDA
Current per GPIO
GPIO injection current per pin
Electrostatic discharge human body
model
Electrostatic discharge charged device
model
Pin current for latch-up
–0.5
–0.5
–0.5
–25
–0.5
2200
500
–140
–
6
V Absolute maximum
–
1.95
V Absolute maximum
– V_DD+0.5 V Absolute maximum
–
25
mA Absolute maximum
–
0.5
mA Absolute maximum
–
–
V
–
–
V
–
140
mA
Device Level Specifications
All specifications are valid for -40 °C  TA  105 °C and TJ  125 °C, except where noted. Specifications are valid for 1.71 V to 5.5 V,
except where noted.
Table 2. DC Specifications
Spec ID# Parameter
Description
Min Typ Max Units Details / Conditions
SID53
SID255
V_DD
V_DDD
Power Supply Input Voltage (V_DDA =
V_DDD = V_DD)
1.8
–
5.5
Power Supply Input Voltage unregulated 1.71 1.8 1.89
V With regulator
enabled
V Internally unregulated
Supply
SID54
SID55
SID56
V_CCD
C_EFC
C_EXC
Output voltage (for core logic)
External Regulator voltage bypass
Power supply decoupling capacitor
–
1.8
–
V
1
1.3
1.6
µF X5R ceramic or better
–
1
–
µF X5R ceramic or better
Active Mode, V_DD = 1.71 V to 5.5 V, –40 °C to +105 °C
SID6
I_DD1
Execute from Flash; CPU at 6 MHz
SID7
I_DD2
Execute from Flash; CPU at 12 MHz
SID8
I_DD3
Execute from Flash; CPU at 24 MHz
SID9
I_DD4
Execute from Flash; CPU at 48 MHz
–
2.2
2.8
mA
–
3.7
4.2
mA
–
6.7
7.2
mA
–
13
13.8 mA
Sleep Mode, –40 °C to +105 °C
SID21
I_DD16
I²C wakeup, WDT, and Comparators on. –
Regulator Off.
SID22
I_DD17
I²C wakeup, WDT, and Comparators on. –
SID23
SID24
I_DD18
I_DD19
I²C wakeup, WDT, and Comparators on. –
Regulator Off.
I²C wakeup, WDT, and Comparators on. –
1.75 2.1
1.7
2.1
2.35 2.8
2.25 2.8
mA V_DD = 1.71 to 1.89,
6 MHz
mA V_DD = 1.8 to 5.5,
6 MHz
mA V_DD = 1.71 to 1.89,
12 MHz
mA V_DD = 1.8 to 5.5,
12 MHz
Note
1. Usage above the absolute maximum conditions listed in Table 1 may cause permanent damage to the device. Exposure to absolute maximum conditions for extended
periods of time may affect device reliability. The maximum storage temperature is 150 °C in compliance with JEDEC Standard JESD22-A103, High Temperature
Storage Life. When used below absolute maximum conditions but above normal operating conditions, the device may not operate to specification.
Document Number: 001-93963 Rev. *G
Page 16 of 42