STC5425 Datasheet, PDF (43/48 Pages) Connor-Winfield Corporation – Line Card Clock

Noise Transfer Functions
STC5425
Line Card Clock
Data sheet
User may write to register Loop Bandwidth to set the PLL loop bandwidth for each timing generator. The
noise transfer function of the PLL filter is determined by the loop bandwidth. Figure 11 shows the noise transfer
functions as the loop bandwidth vary from 100mHz to 103Hz.
TBD
Figure 11: Noise Transfer Functions
Preliminary
Page 43 of 48 TM113
Rev:P1.3
© Copyright the Connor-Winfield Corp. All Rights Reserved Specifications subject to change without notice
Date: September 20, 2011