EP2AGX190FF35C4N Datasheet, PDF (58/90 Pages) Altera Corporation – Volume 3: Device Datasheet and Addendum

1–50
Chapter 1: Device Datasheet for Arria II Devices
Switching Characteristics
Table 1–41. Transceiver Block Jitter Specifications for Arria II GZ Devices (Note 1), (2) (Part 5 of 7)
Symbol/
Description
Sinusoidal jitter tolerance (peak-
to-peak)
Conditions
Jitter Frequency = 38.2 KHz
Data rate = 6.375 Gbps
Pattern = PRBS31 BER = 10^-12
Jitter Frequency = 3.82 MHz
Data rate = 6.375 Gbps
Pattern = PRBS31 BER = 10^-12
Jitter Frequency = 20 MHz
Data rate = 6.375 Gbps
Pattern = PRBS31 BER = 10^-12
–C3 and –I3
Min Typ Max
> 0.5
> 0.05
> 0.05
–C4 and –I4
Unit
Min Typ Max
——
—
UI
——
—
UI
——
—
UI
SDI Transmitter Jitter Generation (12)
Alignment jitter
(peak-to-peak)
Data rate = 1.485 Gbps (HD)
Pattern = color bar Low-frequency 0.2 —
—
0.2 —
—
UI
roll-off = 100 KHz
Data rate = 2.97 Gbps (3G) Pattern
= color bar Low-frequency roll-off 0.3 —
—
0.3 —
—
UI
= 100 KHz
SDI Receiver Jitter Tolerance (12)
Jitter frequency = 15 KHz
Data rate = 2.97 Gbps (3G) Pattern
= single line scramble color bar
Jitter frequency = 100 KHz
Sinusoidal jitter tolerance (peak-
to-peak)
Data rate = 2.97 Gbps (3G) Pattern
= single line scramble color bar
Jitter frequency = 148.5 MHz
Data rate = 2.97 Gbps (3G) Pattern
= single line scramble color bar
Jitter frequency = 20 KHz
Data rate = 1.485 Gbps (HD)
pattern = 75% color bar
Sinusoidal jitter tolerance (peak-
to-peak)
Jitter frequency = 100 KHz
Data rate = 1.485 Gbps (HD)
Pattern = 75% color bar
Jitter frequency = 148.5 MHz
Data rate = 1.485 Gbps (HD)
Pattern = 75% color bar
SAS Transmit Jitter Generation (13)
Total jitter at 1.5 Gbps (G1)
Pattern = CJPAT
—
Deterministic jitter at 1.5 Gbps
(G1)
Pattern = CJPAT
—
Total jitter at 3.0 Gbps (G2)
Pattern = CJPAT
—
>2
> 0.3
> 0.3
>1
> 0.2
> 0.2
—
0.55
—
0.35
—
0.55
>2
UI
> 0.3
UI
> 0.3
UI
>1
UI
> 0.2
UI
> 0.2
UI
— — 0.55 UI
— — 0.35 UI
— — 0.55 UI
Arria II Device Handbook Volume 3: Device Datasheet and Addendum
July 2012 Altera Corporation