HMC701LP6CE Datasheet, PDF (39/40 Pages) Hittite Microwave Corporation – 8 GHz 16-Bit Fractional-N Synthesizer

v09.1112
HMC701LP6CE
8 GHz 16-BIT FRACTIONAL-N PLL
Table 44. Reg 22h Reserved
Bit
Type
Name
23:0
RO
Reserved
Outline Drawing
Default
0
Reserved
Description
NOTES:
1. PACKAGE BODY MATERIAL: LOW STRESS INJECTION MOLDED
PLASTIC SILICA AND SILICON IMPREGNATED.
2. LEAD AND GROUND PADDLE MATERIAL: COPPER ALLOY.
3. LEAD AND GROUND PADDLE PLATING: 100% MATTE TIN.
4. DIMENSIONS ARE IN INCHES [MILLIMETERS].
5. LEAD SPACING TOLERANCE IS NON-CUMULATIVE.
6. PAD BURR LENGTH SHALL BE 0.15mm MAX.
PAD BURR HEIGHT SHALL BE 0.25mm MAX.
7. PACKAGE WARP SHALL NOT EXCEED 0.05mm
8. ALL GROUND LEADS AND GROUND PADDLE
MUST BE SOLDERED TO PCB RF GROUND.
9. REFER TO HITTITE APPLICATION NOTE
FOR SUGGESTED PCB LAND PATTERN.
Package Information
Part Number
Package Body Material
Lead Finish
HMC701LP6CE RoHS-compliant Low Stress Injection Molded Plastic 100% matte Sn
[1] 4-Digit lot number XXXX
[2] Max peak reflow temperature of 260 °C
MSL Rating
MSL1 ^[2]
Package Marking ^[1]
H701
XXXX
39
Irrliniecgfseoh_{Fpntrsomsoenoasrftiisibtohpingilrirrtdyafi}un_{cpirstnaeeairdsts,ihesbesduydmtehimebaldtypivmlbiAcPeyaanyAhtariorlynooenagslnauoolDrgetn}eofD_:rdvtoheim₉cev_teri_{7cwoistes8issiuspe-fso2l}beur_a.ne5idtSlcis₀eep_evure_-esca₃de_oinf,i3yctnroa_{dop4triaboe3ftenoersrnastascn:oucyrbuHFjipernaaacfirtttteiexnttnoig:}at_{tecner9mhdiga7ehMnrnte8gstlseii-}ao_co2bwff_rlAie_{5ptohn.a0oawtHuelo-tonag3}wnts_{voDe3otveiecr7}eveori_3C,.ctheNnes_{ooor. rpOFOPoorhrndraoenetpTierroei:ccnO7eh8,,nn12od--30lleoi2lngiA9veye-l4rWpay7h,at0yaa0w,n•PRdw.OOowtor.ad.Bdephorl,iaxtocCtn9ietl1hein0oe.e6rcld,maoeNtmrswosf:rwowArwondo.aa,dlno,MagMloAADge.00cv21oic0m8e62s24,-9In10c.6,}
Trademarks and registered trademarks a_Are_pth_pe_lp_ir_cop_ae_tr_ity_oo_nf th_Sei_ur r_pes_ppe_oct_riv_te_: o_Pw_hne_ors_n. _{e: 978-250-33}A₄p₃plic_oa_rtio_an_pS_pu_sp_@po_hrt_i:_tP_tih_teo_.n_ce_o: 1_m-800-ANALOG-D