Z8673312PSG Datasheet, PDF (24/84 Pages) Zilog, Inc. – CMOS Z8 OTP Microcontrollers

CMOS Z8^® OTP Microcontrollers
Product Specification
20
Electrical Characteristics
Absolute Maximum Ratings
Table 10. Absolute Maximum Ratings
Parameter
Min
Ambient Temperature under Bias
–40
Storage Temperature
–65
Voltage on any Pin with Respect to V_SS
–0.6
Voltage on V_DD Pin with Respect to V_SS
–0.3
Voltage on XTAL1, P32, P33 and RESET Pins with Respect to V_SS –0.6
Total Power Dissipation
Maximum Allowable Current out of V_SS
Maximum Allowable Current into V_DD
Maximum Allowable Current into an Input Pin
–600
Maximum Allowable Current into an Open-Drain Pin
–600
Maximum Allowable Output Current Sunk by Any I/O Pin
Maximum Allowable Output Current Sourced by Any I/O Pin
Maximum Allowable Output Current Sunk by RESET Pin
Notes
1. This applies to all pins except XTAL pins and where otherwise noted.
2. There is no input protection diode from pin to V_DD.
3. This excludes XTAL pins.
4. Device pin is not at an output Low state.
Max
+105
+150
+7
+7
V_DD+1
1.21
220
180
+600
+600
25
25
3
Units
C
C
V
V
V
W
mA
mA
µA
µA
mA
mA
mA
Notes
1
2
3
4
Stresses greater than those listed under Absolute Maximum Ratings may cause permanent
damage to the device. This is a stress rating only; functional operation of the device at any
condition above those indicated in the operational sections of these specifications is not
implied. Exposure to absolute maximum rating conditions for an extended period may
affect device reliability.
PS022901-0508
Electrical Characteristics