Z8PE003 Datasheet, PDF (13/48 Pages) Zilog, Inc. – FEATURE-ENHANCED Z8PLUS 1K ROM ONE-TIME PROGRAMMABLE (OTP) MICROCONTROLLER

ZiLOG
Z8PE003
Z8Plus OTP Microcontroller
Table 6. DC Electrical Characteristics (Continued)
Sym
Parameter
V_CC1
T_A = –40ºC to +105ºC
Extended Temperatures
Typical²
Min
Max @ 25°C
Units Conditions
I_CC1
Standby Current 4.5V
2.0
1.0
mA HALT mode V_IN = 0V,
V_CC @ 10 MHz
5.5V
2.0
1.0
mA HALT mode V_IN = 0V,
V_CC @ 10 MHz
I_CC2
Standby Current 4.5V
700
250
nA STOP mode V_IN
= 0V,V_CC
5.5V
700
250
nA STOP mode V_IN
= 0V,V_CC
Notes:
1. The V_CC voltage specification of 4.5V and 5.5V guarantees 5.0V ±0.5V.
2. Typical values are measured at V_CC = 5.0V; V_SS = 0V = GND.
3. For analog comparator input when analog comparator is enabled.
4. No protection diode is provided from the pin to V_CC. External protection is recommended.
5. All outputs are unloaded and all inputs are at V_CC or V_SS level.
6. CL1 = CL2 = 22 pF.
7. Same as note 5, except inputs are at V_CC.
Notes
5,6
5,6
7
7
DS007500-Z8X0399
PRELIMINARY
13