XC4VLX15_08 Datasheet, PDF (56/56 Pages) Xilinx, Inc – Virtex-4 FPGA Data Sheet

R
Virtex-4 FPGA Data Sheet: DC and Switching Characteristics
Date
09/28/07
12/11/07
04/10/08
Version
3.0
3.1
3.2
Revisions
• SPEED SPECIFICATION version for this data sheet release: v1.67.
• Promoted data sheet to Production status.
• Table 14: Moved XC4VFX140, all speed grades, from Advance to Production status.
• Table 59: Added/updated all Global Clock Tree Skew values. Qualified Note (2) by
adding “vertical”.
• Table 60: Added Package Skew values for XC4VFX40, XC4VFX100, and XC4VFX140.
• Table 63: Added JTAG ID code for XC4VFX140.
• SPEED SPECIFICATION version for this data sheet release: v1.68.
• Added new copyright notice and legal disclaimer section.
• Table 13: Removed table note references to XAPP700, XAPP704, and XAPP705
(obsolete). Renumbered table notes.
• Table 15: Added new Note 1, renumbered subsequent table notes.
• Table 30: Removed table rows for LVPECL_33, LVDS_33, and LVDSEXT_33.
• Table 30, Table 31: Corrected “electron-coupled” to “emitter-coupled”.
• Table 31: For LVDS Extended Mode 2.5V, corrected I/O Standard Attribute to
LVDSEXT_25.
• Table 37: Added Note 4 specifying F_TOG for -11 FX devices as 1181 MHz.
• Table 43: Added parameter F_{MAX_READBACK}.
• Table 58: Corrected T_PSFD for XC4VFX100 devices to 1.99 ns.
• Section Production Stepping, page 50: Advised that current stepping level is reported
by the ISE tool in the PAR report.
• SPEED SPECIFICATION version for this data sheet release: v1.68.
• Table 28, page 22: Re-inserted table.
• Table 43, page 35: Updated Symbol names for the DRP entries.
• Table 63, page 50: Revised code for XC4VFX40 package to 0.
Notice of Disclaimer
THE XILINX HARDWARE FPGA AND CPLD DEVICES REFERRED TO HEREIN (“PRODUCTS”) ARE SUBJECT TO THE TERMS AND
CONDITIONS OF THE XILINX LIMITED WARRANTY WHICH CAN BE VIEWED AT http://www.xilinx.com/warranty.htm. THIS LIMITED
WARRANTY DOES NOT EXTEND TO ANY USE OF PRODUCTS IN AN APPLICATION OR ENVIRONMENT THAT IS NOT WITHIN THE
SPECIFICATIONS STATED IN THE XILINX DATA SHEET. ALL SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.
PRODUCTS ARE NOT DESIGNED OR INTENDED TO BE FAIL-SAFE OR FOR USE IN ANY APPLICATION REQUIRING FAIL-SAFE
PERFORMANCE, SUCH AS LIFE-SUPPORT OR SAFETY DEVICES OR SYSTEMS, OR ANY OTHER APPLICATION THAT INVOKES
THE POTENTIAL RISKS OF DEATH, PERSONAL INJURY, OR PROPERTY OR ENVIRONMENTAL DAMAGE (“CRITICAL
APPLICATIONS”). USE OF PRODUCTS IN CRITICAL APPLICATIONS IS AT THE SOLE RISK OF CUSTOMER, SUBJECT TO
APPLICABLE LAWS AND REGULATIONS.
DS302 (v3.2) April 10, 2008
www.xilinx.com
Product Specification
56