W78ERD2 Datasheet, PDF (68/72 Pages) Winbond – 8-BIT MICROCONTROLLER

W78ERD2
MOV TCON, #00H
MOV IP, #00H
MOV IE, #82H
MOV R6, #F0H
MOV R7, #FFH
MOV TL0, R6
MOV TH0, R7
MOV TMOD, #01H
MOV TCON, #10H
MOV PCON, #01H
; TR = 0 TIMER0 STOP
; IP = 00H
; TIMER0 INTERRUPT ENABLE FOR WAKE-UP FROM IDLE MODE
; TL0 = F0H
; TH0 = FFH
; TMOD = 01H, SET TIMER0 A 16-BIT TIMER
; TCON = 10H, TR0 = 1, GO
; ENTER IDLE MODE FOR LAUNCHING THE IN-SYSTEM
; PROGRAMMABILITY
;********************************************************************************
;* Normal mode 64KB AP Flash EPROM program: depending user's application
;********************************************************************************
NORMAL_MODE:
.
; User's application program
.
.
.
EXAMPLE 2:
;*****************************************************************************************************************************
;* Example of 4KB LD Flash EPROM program: This lorder program will erase the 64KB AP Flash EPROM
;* first,then reads the new ;* code from external SRAM and program them into 64KB AP Flash EPROM bank.
;* XTAL = 40MHz
;*****************************************************************************************************************************
.chip 8052
.RAMCHK OFF
.symbols
CHPCON
CHPENR
SFRAL
SFRAH
SFRFD
SFRCN
EQU
EQU
EQU
EQU
EQU
EQU
BFH
F6H
C4H
C5H
C6H
C7H
ORG 000H
LJMP 100H
; JUMP TO MAIN PROGRAM
;************************************************************************
;* 1. TIMER0 SERVICE VECTOR ORG = 0BH
;************************************************************************
ORG 000BH
CLR TR0
; TR0 = 0, STOP TIMER0
MOV TL0, R6
MOV TH0, R7
RETI
;************************************************************************
;* 4KB LD Flash EPROM MAIN PROGRAM
;************************************************************************
ORG 100H
- 68 -