W83697HG Datasheet, PDF (59/109 Pages) Winbond – WINBOND LPC I/O

W83697HF/ HG
FAN 1 Duty Cycle Select Register-- 01h (Bank 0)
Power on default [7:0] 1111,1111 b
BIT
NAME
READ/WRITE
DESCRIPTION
7-0 F1_DC[7:0]
Read/Write
FanPWM1 Duty Cycle. This 8-bit register determines
the number of input clock cycles, out of 256-cycle
period, during which the PWM output is high. During
smart fan 1 control mode, read this register will return
smart fan duty cycle.
00h: PWM output is always logical Low.
FFh: PWM output is always logical High.
XXh: PWM output logical High percentage is
(XX/256*100%) during one cycle.
FAN 2 Pre-Scale Register-- Index 02h
Power on default [7:0] = 0000,0001 b
BIT
NAME
READ/WRIT
E
7 PWM_CLK_SEL2 Read/Write
6-0 PRE_SCALE2[6:0] Read/Write
DESCRIPTION
PWM 2 Input Clock Select. This bit select Fan 2 input
clock to pre-scale divider.
0: 1 MHz
1: 125 KHz
Fan 2 Input Clock Pre-Scale. The divider of input
clock is the number defined by pre-scale. Thus, writing
0 transfers the input clock directly to counter. The
maximum divider is 128 (7Fh).
01h : divider is 1
02h : divider is 2
03h : divider is 3
:
:
PWM frequency = (Input Clock / Pre-scale) / 256
- 56 -