W741C260 Datasheet, PDF (14/92 Pages) Winbond – 4-BIT MICROCONTROLLER

W741C260
Mode Register 0 (MR0)
Mode Register 0 is organized as a 4-bit binary register (MR0.0 to MR0.3). MR0 can be used to control
the operation of Timer 0. The bit descriptions are as follows:
32
MR0 W
10
W
Note: W means write only.
Bit 0 = 0 The internal fundamental frequency of Timer 0 is FOSC/4.
= 1 The internal fundamental frequency of Timer 0 is FOSC/1024.
Bit 1
Reserved
Bit 2
Reserved
Bit 3 = 0 Timer 0 stops down-counting.
= 1 Timer 0 starts down-counting.
Mode Register 1 (MR1)
Mode Register 1 is organized as a 4-bit binary register (MR1.0 to MR1.3). MR1 can be used to control
the operation of Timer 1. The bit descriptions are as follows:
3210
MR1 W W W W
Note: W means write only.
Bit 0 = 0 The internal fundamental frequency of Timer 1 is FOSC.
= 1 The internal fundamental frequency of Timer 1 is FOSC/64.
Bit 1 = 0 The fundamental frequency source of Timer 1 is the internal clock.
= 1 The fundamental frequency source of Timer 1 is the external clock from RC.0 input pin.
Bit 2 = 0 The specified waveform of the MFP generator is delivered at the MFP output pin.
= 1 The specified frequency of Timer 1 is delivered at the MFP output pin.
Bit 3 = 0 Timer 1 stops down-counting.
= 1 Timer 1 starts down-counting.
- 14 -