TA1316AN Datasheet, PDF (30/115 Pages) Toshiba Semiconductor – YCbCr/YPbPr Signal and Sync Processor for Digital TV, Progressive Scan TV and Double Scan TV

Table 5: DR-R, DR-B/G
0D-D0
0
0
1
1
0E-D0
0
1
0
1
Reference Axis
R
R
G
B
Drive Gain1
G
G
R
G
TA1316AN
Drive Gain2
B
B
B
R
Read Mode
Parameter
POR
IK-IN
RGB-OUT
YUV-IN
H-OUT
VP-OUT
RGB-IN
SYNC-IN
Explanation
Power-on reset
0: Register preset, 1: Normal
After power-on, 0 is read on first read; 1 on subsequent reads.
IK input detection: detects input to pin 45.
0: NG (no input), 1: OK (input)
RGB-OUT self-check result: detects output from pins 41, 42 and 43.
0: NG (no output), 1: OK (output)
Returns OK when signal is detected on all three outputs. If signals are small, does not return
OK.
YUV-IN self-check result: detects input to pins 3, 4 and 5 or pins 8, 9 and 10.
0: NG (no input), 1: OK (input)
Returns OK when AC signal is detected on all three inputs. If signals are small or are DC
voltage, does not return OK.
H-OUT self-check result: detects output from pin 26.
0: NG (no output), 1: OK (output)
VP-OUT self-check result: detects output from pin 27.
0: NG (no output), 1: OK (output)
RGB-IN self-check result: detects input to pins 33, 34 and 35.
0: NG (no input), 1: OK (input)
Returns OK when AC signal is detected on all three inputs. If signals are small or are DC
voltage, does not return OK.
SYNC-IN self-check result: detects input to pin 14.
0: NG (no input), 1: OK (input)
30
2002-10-04