MSP430F241X_11 Datasheet, PDF (94/107 Pages) Texas Instruments – MIXED SIGNAL MICROCONTROLLER

MSP430F241x, MSP430F261x
MIXED SIGNAL MICROCONTROLLER
SLAS541G -- JUNE 2007 -- REVISED MARCH 2011
LITERATURE
NUMBER
SLAS541
SLAS541A
SLAS541B
SLAS541C
SLAS541D
SLAS541E
SLAS541F
SLAS541G
Data Sheet Revision History
SUMMARY
Product Preview release
Production Data release
Corrected the format and the content shown on the first page.
Corrected pin number of P3.6 and P3.7 in 64-pin package in the terminal function list.
Corrected the port schematics.
Corrected “calibration data” section (page 20). Typos and formatting corrected.
Added the figure “typical characteristics -- LPM4 current” (Page 33).
Added preview of MSP430F261x BGA devices.
Release to market of MSP430F261x BGA devices
Added the ESD disclaimer (page 1).
Added reserved BGA pins to the terminal function list (pages 10 and following).
Corrected the references in the output port parameters (page 36).
Corrected the cumulative program time of the flash (page 75).
Corrected LFXT1Sx values in Figures 23 and 24 (page 52).
Corrected XT2Sx values in Figures 25 and 26 (page 54).
Corrected t_CMErase MIN value from 200 ms to 20 ms and removed two notes in the flash memory table (page 75).
Renamed Tags Used by the ADC Calibration Tags table to Tags used by the TLV Structure (page 20).
Changed value of TAG_ADC12_1 from 0x10 to 0x08 in Tags used by the TLV Structure (page 20).
Added CAOUT to P1.0/TACLK, Changed Timer_A3.CCI0A to Timer_A3.CCI1A and Timer_A3.TA0 to Timer_A3.TA1 in
P1.2/TA1 row, Changed Timer_A3.CCI0A to Timer_A3.CCI2A and Timer_A3.TA0 to Timer_A3.TA2 in P1.3/TA2 row in
Port P1 (P1.0 to P1.7) pin functions table (page 78).
Changed TA0 to Timer_A3.CCI0B in P2.2/CAOUT/TA0/CA4 row of Port P2.0, P2.3, P2.4, P2.6 and P2.7 pin functions
table (page 80).
Changed limits on t_d(SVSon) parameter (page 40)
94
 POST OFFICE BOX 655303 DALLAS, TEXAS 75265