MSP430F241X_11 Datasheet, PDF (34/107 Pages) Texas Instruments – MIXED SIGNAL MICROCONTROLLER

MSP430F241x, MSP430F261x
MIXED SIGNAL MICROCONTROLLER
SLAS541G -- JUNE 2007 -- REVISED MARCH 2011
electrical characteristics over recommended ranges of supply voltage and operating free-air
temperature (unless otherwise noted)
low-power mode supply current into V_CC excluding external current (see Notes 1 and 2) (continued)
I_LPM4
PARAMETER
TEST CONDITIONS
Low-power mode 4
(LPM4) current,
see Note 3
f_DCO = f_MCLK = f_SMCLK = 0 MHz,
f_ACLK = 0 Hz,
CPUOFF = 1, SCG0 = 1, SCG1 = 1,
OSCOFF = 1
T_A
--40C
25C
85C
105C
V_CC
2.2 V
MIN TYP MAX UNIT
0.1 0.5
0.1 0.5
4
6 ^A
13
23
I_LPM4
NOTES:
Low-power mode 4
(LPM4) current,
see Note 3
f_DCO = f_MCLK = f_SMCLK = 0 MHz,
f_ACLK = 0 Hz,
CPUOFF = 1, SCG0 = 1, SCG1 = 1,
OSCOFF = 1
--40C
25C
85C
3V
105C
0.2 0.5
0.2 0.5
4.7
7 ^A
14
24
1. All inputs are tied to 0 V or V_CC. Outputs do not source or sink any current.
2. The currents are characterized with a micro crystal CC4V--T1A SMD crystal with a load capacitance of 9 pF. The internal and external
load capacitance is chosen to closely match the required 9 pF.
3. Current for Brownout included.
typical characteristics -- LPM4 current
16.0
15.0
14.0
13.0
12.0
11.0
10.0
9.0
8.0
7.0
6.0
5.0
4.0
3.0
2.0
1.0
0.0
--40.0 --20.0
Vcc = 3.6 V
Vcc = 3.0 V
Vcc = 2.2 V
Vcc = 1.8 V
0.0 20.0 40.0 60.0 80.0 100.0 120.0
T_A -- Temperature -- C
Figure 4. I_LPM4 -- LPM4 Current vs Temperature
34
 POST OFFICE BOX 655303 DALLAS, TEXAS 75265