LM3S1H11 Datasheet, PDF (870/956 Pages) Texas Instruments – Stellaris® LM3S1H11 Microcontroller

Signal Tables
Table 19-7. Signals by Pin Number (continued)
Pin Number
Pin Name
Pin Type Buffer Type^a Description
PH6
I/O
TTL
GPIO port H bit 6.
G3
EPI0S26
I/O
TTL
EPI module 0 signal 26.
SSI1Rx
I
TTL
SSI module 1 receive.
G10
VDD
-
Power Positive supply for I/O and some logic.
G11
VDD
-
Power Positive supply for I/O and some logic.
G12
VDD
-
Power Positive supply for I/O and some logic.
PD3
I/O
TTL
GPIO port D bit 3.
CCP0
I/O
TTL
Capture/Compare/PWM 0.
H1
CCP7
I/O
TTL
Capture/Compare/PWM 7.
EPI0S21
I/O
TTL
EPI module 0 signal 21.
U1Tx
O
TTL
UART module 1 transmit. When in IrDA mode, this signal has IrDA
modulation.
PD2
I/O
TTL
GPIO port D bit 2.
CCP5
I/O
TTL
Capture/Compare/PWM 5.
H2
CCP6
I/O
TTL
Capture/Compare/PWM 6.
EPI0S20
I/O
TTL
EPI module 0 signal 20.
U1Rx
I
TTL
UART module 1 receive. When in IrDA mode, this signal has IrDA
modulation.
PH7
I/O
TTL
GPIO port H bit 7.
H3
EPI0S27
I/O
TTL
EPI module 0 signal 27.
SSI1Tx
O
TTL
SSI module 1 transmit.
H10
VDD
-
Power Positive supply for I/O and some logic.
H11
RST
I
TTL
System reset input.
PF1
I/O
TTL
GPIO port F bit 1.
H12
CCP3
I/O
TTL
Capture/Compare/PWM 3.
U1RTS
O
TTL
UART module 1 Request to Send modem flow control output line.
J1
PG2
I/O
TTL
GPIO port G bit 2.
J2
PG3
I/O
TTL
GPIO port G bit 3.
J3
GND
-
Power Ground reference for logic and I/O pins.
J10
GND
-
Power Ground reference for logic and I/O pins.
PF2
I/O
TTL
GPIO port F bit 2.
J11
SSI1Clk
I/O
TTL
SSI module 1 clock.
PF3
I/O
TTL
GPIO port F bit 3.
J12
SSI1Fss
I/O
TTL
SSI module 1 frame.
PG0
I/O
TTL
GPIO port G bit 0.
EPI0S13
I/O
TTL
EPI module 0 signal 13.
K1
I2C1SCL
I/O
OD
I²C module 1 clock.
U2Rx
I
TTL
UART module 2 receive. When in IrDA mode, this signal has IrDA
modulation.
870
January 23, 2012
Texas Instruments-Production Data