CC3220MOD_017 Datasheet, PDF (87/100 Pages) Texas Instruments – SimpleLink Wi-Fi CERTIFIED Wireless MCU Modules

www.ti.com
CC3220MOD, CC3220MODA
SWRS206B – MARCH 2017 – REVISED AUGUST 2017
User's Guides
Simplelink™ CC3x20 Wi-Fi® Embedded Programming This application note describes in details
additional options that leverage all the features UniFlash has to offer, but without the
necessary connected PC. This option is referred to as Embedded Programming. To achieve
embedded programming, bootloader protocol implemented over UART is described in detail.
UniFlash SimpleLink™ CC3x20 Wi-Fi® and IoC™ Solution ImageCreator and Pro This document
describes the installation, operation, and usage of the SimpleLink ImageCreator tool as part
of the UniFlash.
SimpleLink™ CC3x20 Wi-Fi® and Internet of Things Network Processor This document provides
software (SW) programmers with all of the required knowledge for working with the
networking subsystem of the SimpleLink Wi-Fi devices. This guide provides basic guidelines
for writing robust, optimized networking host applications, and describes the capabilities of
the networking subsystem. The guide contains some example code snapshots, to give users
an idea of how to work with the host driver. More comprehensive code examples can be
found in the formal software development kit (SDK). This guide does not provide a detailed
description of the host driver APIs.
SimpleLink™ CC3220 Wi-Fi® Out-of-Box Application This application demonstrates the out-of-box
(OOB) experience with the CC3220 LaunchPad™ Development Kit from Texas Instruments.
SimpleLink™ CC3x20 Wi-Fi® Provisioning for Mobile Applications This guide describes TI’s
SimpleLink™ Wi-Fi® provisioning solution for mobile applications, specifically on the use of
the Android^®™ and iOS^® building blocks for UI requirements, networking, and provisioning
APIs required for building the mobile application.
SimpleLink™ CC3220 Wi-Fi® Out-of-Box Quick Start Guide This quick start guide details the out-of-
box experience for the CC3220 LaunchPad™ Development Kit from Texas Instruments.
SimpleLink™ CC3220 Wi-Fi® and Internet of Things TRM This manual describes the modules and
peripherals of the SimpleLink CC32xx wireless MCU. Each description presents the module
or peripheral in a general sense. Not all features and functions of all modules or peripherals
may be present on all devices. Pin functions, internal signal connections, and operational
parameters differ from device to device. The user should consult the device-specific data
sheet for these details.
SimpleLink™ CC3x20 Wi-Fi® and Internet-on-a-chip™ Solution Radio Tool The Radio Tool serves as
a control panel for direct access to the radio, and can be used for both the radio frequency
(RF) evaluation and for certification purposes. This guide describes how to have the tool
work seamlessly on Texas Instruments ™ evaluation platforms such as the BoosterPack™
plus FTDI emulation board for CC3120 devices, and the LaunchPad™ for CC3220 devices.
SimpleLink™ CC3220 Wi-Fi® and Internet of Things Solution, a Single-Chip Wireless MCU
This
guide is intended to assist users in the initial setup and demonstration of running their first
sample application for the CC3220, CC3220S, CC3220SF, CC3220MODx, and
CC3220MODAx SimpleLink™ Wi-Fi® and Internet of Things Solution, a Single-Chip
Wireless MCU from Texas Instruments™. The guide explains how to install the software
development kit (SDK) and various other tools required to get started with the first
application.
SimpleLink™ CC3220MOD Wi-Fi® LaunchPad™ Development Kit Hardware The CC3220MOD
SimpleLink LaunchPad™ Development Kit (LAUNCHCC3220MODASF) is a low-cost
evaluation platform for ARM® Cortex®-M4-based MCUs. The LaunchPad design highlights
the CC3220MOD Internet-on-a chip™ solution and Wi-Fi capabilities. The CC3220MOD
LaunchPad also features temperature and accelerometer sensors, programmable user
buttons, three LEDs for custom applications, and onboard emulation for debugging. The
stackable headers of the CC3220MOD LaunchPad XL interface demonstrate how easy it is
to expand the functionality of the LaunchPad when interfacing with other peripherals on
many existing BoosterPack™ Plug-in Module add-on boards, such as graphical displays,
audio codecs, antenna selection, environmental sensing, and more.
SimpleLink™ CC3220 Wi-Fi® and Internet of Things This document introduces the user to the
environment setup for the CC3220x device, along with some reference examples from the
software development kit (SDK). This document explains both the platform and the
framework available to enable further application development.
Copyright © 2017, Texas Instruments Incorporated
Device and Documentation Support
87
Submit Documentation Feedback
Product Folder Links: CC3220MOD CC3220MODA