CC3220MOD_017 Datasheet, PDF (50/100 Pages) Texas Instruments – SimpleLink Wi-Fi CERTIFIED Wireless MCU Modules

CC3220MOD, CC3220MODA
SWRS206B – MARCH 2017 – REVISED AUGUST 2017
www.ti.com
5.14.5.3.1 GPIO Input Transition Time Parameters
Table 5-10 lists the input transition time parameters.
Table 5-10. GPIO Input Transition Time Parameters
t_r
t_f
Input transition time (t_r, t_f), 10% to 90%
MIN
MAX
UNIT
1
3
ns
1
3
ns
5.14.5.4 I²C
The CC3220MODx and CC3220MODAx MCUs include one I2C module operating with standard (100
kbps) or fast (400 kbps) transmission speeds.
Figure 5-13 shows the I²C timing diagram.
T2
T6
T5
I2CSCL
T1
T4
T7
T8
T3
T9
I2CSDA
Figure 5-13. I²C Timing Diagram
Table 5-11 lists the I²C timing parameters.
Table 5-11. I²C Timing Parameters⁽¹⁾
ITEM
NAME
DESCRIPTION
MIN
MAX
UNIT
T2
t_LP
T3
t_SRT
Clock low period
SCL/SDA rise time
See ⁽²⁾
System clock
See ⁽³⁾
ns
T4
t_DH
Data hold time
NA
T5
t_SFT
T6
t_HT
SCL/SDA fall time
Clock high time
3
See ⁽²⁾
ns
System clock
T7
t_DS
Data setup time
tLP/2
System clock
T8
t_SCSR
Start condition setup time
36
System clock
T9
t_SCS
Stop condition setup time
24
System clock
(1) All timing is with 6-mA drive and 20-pF load.
(2) This value depends on the value programmed in the clock period register of I²C. Maximum output frequency is the result of the minimal
value programmed in this register.
(3) Because I²C is an open-drain interface, the controller can drive logic 0 only. Logic is the result of external pullup. Rise time depends on
the value of the external signal capacitance and external pullup register.
50
Specifications
Copyright © 2017, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Links: CC3220MOD CC3220MODA