CC3220MOD_017 Datasheet, PDF (40/100 Pages) Texas Instruments – SimpleLink Wi-Fi CERTIFIED Wireless MCU Modules

CC3220MOD, CC3220MODA
SWRS206B – MARCH 2017 – REVISED AUGUST 2017
Table 5-1 lists the brownout and blackout voltage levels.
www.ti.com
Table 5-1. Brownout and Blackout Voltage Levels
CONDITION
V_brownout
V_blackout
VOLTAGE LEVEL
2.1
1.67
UNIT
V
V
5.8 Electrical Characteristics
T_A = 25°C, V_BAT = 3.3 V
GPIO Pins Except 25, 26, 42, and 44 (25°C)⁽¹⁾
PARAMETER
TEST CONDITIONS
MIN
NOM
MAX
UNIT
C_IN Pin capacitance
V_IH High-level input voltage
V_IL Low-level input voltage
I_IH
High-level input current
I_IL
Low-level input current
V_OH High-level output voltage
V_OL Low-level output voltage
High-level
I_OH source
current,
2-mA drive
4-mA drive
6-mA drive
IL = 2 mA; configured I/O drive
strength = 2 mA;
2.4 V ≤ V_DD < 3.6 V
IL = 4 mA; configured I/O drive
strength = 4 mA;
2.4 V ≤ V_DD < 3.6 V
IL = 6 mA; configured I/O drive
strength = 6 mA;
2.4 V ≤ V_DD < 3.6 V
IL = 2 mA; configured I/O drive
strength = 2 mA;
2.3 V ≤ V_DD < 2.4 V
IL = 2 mA; configured I/O drive
strength = 2 mA;
2.4 V ≤ V_DD < 3.6 V
IL = 4 mA; configured I/O drive
strength = 4 mA;
2.4 V ≤ V_DD < 3.6 V
IL = 6 mA; configured I/O drive
strength = 6 mA;
2.4 V ≤ V_DD < 3.6 V
IL = 2 mA; configured I/O drive
strength = 2 mA;
2.3 V ≤ V_DD < 2.4 V
0.65 × V_DD
–0.5
V_DD × 0.2
V_DD × 0.2
V_DD × 0.2
V_DD × 0.25
2
4
6
4
pF
V_DD + 0.5 V
V
0.35 × V_DD
V
5
nA
5
nA
V_DD × 0.8
V_DD × 0.7
V
V_DD × 0.7
V_DD × 0.75
V
mA
2-mA drive
I_OL
Low-level sink
current,
4-mA drive
6-mA drive
2
4
mA
6
(1) TI recommends using the lowest possible drive strength that is adequate for the applications. This recommendation minimizes the risk of
interference to the WLAN radio and reduces any potential degradation of RF sensitivity and performance. The default drive strength
setting is 6 mA.
40
Specifications
Copyright © 2017, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Links: CC3220MOD CC3220MODA