RI-CTL-MB2B-30 Datasheet, PDF (7/40 Pages) Texas Instruments – Series 2000 Reader System

Preface
SCBU044 (11-09-21-077) – January 2008
Edition 001 – January 2008
This is the first edition of this Guide and describes the following Series 2000 Control Modules:
RI-CTL-MB2B Control Module with RS-232 interface
RI-CTL-MB6B Control Module with RS-422/485 interface
Both modules contain Firmware S2000 – REV 1.00
Texas Instruments (TI) reserves the right to make changes to its products or services or to discontinue
any product or service at any time without notice. TI provides customer assistance in various technical
areas, but does not have full access to data concerning the use and applications of customers’ products.
Therefore, TI assumes no liability and is not responsible for Customer applications or product or software
design or performance relating to systems or applications incorporating TI products. In addition, TI
assumes no liability and is not responsible for infringement of patents and/or any other intellectual or
industrial property rights of third parties, which may result from assistance provided by TI.
TI products are not designed, intended, authorized or warranted to be suitable for life support applications
or any other life critical applications which could involve potential risk of death, personal injury, or severe
property or environmental damage.
The TI-RFID logo, the words TI-RFID™ and Tag-it™ are trademarks or registered trademarks of Texas
Instruments Incorporated (TI).
Copyright (C) 2008 Texas Instruments Incorporated (TI)
This document may be downloaded onto a computer, stored and duplicated as necessary to support the
use of the related TI products. Any other type of duplication, circulation or storage on data carriers in any
manner not authorized by TI represents a violation of the applicable copyright laws and shall be
prosecuted.
SCBU044 (11-09-21-077) – January 2008
7
Submit Documentation Feedback