RI-CTL-MB2B-30 Datasheet, PDF (21/40 Pages) Texas Instruments – Series 2000 Reader System

www.ti.com
Service/Configuration Interface
Figure 2-7. Battery Backup for Memory
2.6 Service/Configuration Interface
The Service/Configuration Interface allows both RI-CTL-MB2B and RI-CTL-MB6B to be configured via a
USB serial port. A mini-USB B to USB A cable will be required for most connections.
For USB operation jumper, JP11 must be in place.
Figure 2-8. USB Interface
2.7 Serial Communication Interface
A host (usually a PC) is needed to control the Series 2000 Control module. The computer can either be
situated at the reader site, or it can be at a remote location.
If the distance between the reader and the computer is less than 20 m, the RS-232 version of the Control
Module (RI-CTL-MB2B) can be used; if it is further away the RS-422 or RS-485 version (RI-CTL-MB6B)
should be used.
SCBU044 (11-09-21-077) – January 2008
Submit Documentation Feedback
Installation
21