SLAS191A Datasheet, PDF (46/86 Pages) Texas Instruments – Starter Kit Evaluation Kit Manual

Figure 2–10 shows the proper way to change incorrect entries. Using the Arrow, Delete or Insert keys as
inputs causes unpredictable behavior. After entering an incorrect register content, the entire input should
be entered again. Another method is to press <ESC> and to enter the r[i] command again.
NOTE:
The ENTER key must never be pressed after entering an incorrect input.
To start the register command type r <ENTER>
Type r5 <ENTER> to modify register r5
Incorrect terminal input ’$%^&’
Correct terminal input to modify r5
>init
MSP–STK430A320
>r
reg 0000 : 0300 03de 0008 0000 f48c 0010 0069 000e
reg 0008 : 9a28 406c 0000 ffd0 4040 6807 e2ca 87a0
>r5
reg 0005 : 0010 $%^& 4567
reg 0006 0069
>r
reg 0000 : 0300 03de 0008 0000 f48c 4567 0069 000e
reg 0008 : 9a28 406c 0000 ffd0 4040 6807 e2ca 87a0
>
Enter <ESC>
Figure 2–10. Revise Memory Modification
2–10