SLAS191A Datasheet, PDF (41/86 Pages) Texas Instruments – Starter Kit Evaluation Kit Manual

u The u command, shown in Figure 2–5, sets the user PC to the start vector of the loaded user program.
This performs a user reset of the application. In this example, the start vector of the user application,
located at address 03FEh, is 0300h.
Enter u at the command prompt
>user reset _PC_ _SP_ _SR_
reg 0000 0300 03de 0008 000u0 f48cP1c14 0069 000e
reg 0008 1a28 400f 0000 ffd0 4040 6803 e2c2 07a0
>
Figure 2–5. User Reset Command
2–5