SLAS191A Datasheet, PDF (39/86 Pages) Texas Instruments – Starter Kit Evaluation Kit Manual

b,w The b and w commands shown in Figure 2–3 switch to byte or word indication mode. The two
indication modes are only important for the memory inspect command m. The Monitor completes the
entered command (byte or word).
Enter b at the command prompt
Enter w at the command prompt
>MSP–STK430A320
>byte
>m0300 10
mem 0300 : 40 00 80 80 00 00 52 00 41 10 01 06 04 20 02 00
>word
>m0300 10
mem 0300 : 0040 8080 0000 0052 1041 1601 2004 0002
Figure 2–3. Byte, Word Commands
2–3