TCM4300 Datasheet, PDF (28/69 Pages) Texas Instruments – Advanced RF Cellular Telephone Interface Circuit (ARCTIC )

3.5 TCM4300 to Microcontroller Interface Timing Requirements (Intel Write
Cycle) (see Figure 3–5 and Note 3)
PARAMETER
ALTERNATE
SYMBOL
MIN MAX UNIT
tsu(WA)
Setup time, write address MCA stable before falling edge
of strobe MCRW
TWA(SU)
0
ns
th(WA)
Hold time, write address MCA stable after rising edge of
strobe MCRW
TWA(HO)
10
ns
tsu(W)
Setup time, write data stable MCD before rising edge of
strobe MCRW
TWD(SU)
14
ns
th(W)
Hold time, write data stable MCD after rising edge of
strobe MCRW
TWD(HO)
0
ns
tw(WSTB) Pulse duration, write strobe pulse width low on MCRW
TWR(STB)
60
ns
Setup time, chip select MCCSH and MCCSL stable before
tsu(CS) _{falling edge of strobe MCRW}
TCS(SU)
0
ns
th(CS)
Hold time, chip select MCCSH and MCCSL stable before
rising edge of strobe MCRW
TCS(HO)
0
ns
NOTE 3: Timings are based upon Intel 8C186 (16 MHz).
MCDS
MCRW
(see Note A)
90%
10%
tsu(WA)
tw(WSTB)
10%
90%
th(WA)
MCA4–MCA0
MCD7–MCD0
tsu(W)
th(W)
MCCSH
90%
tsu(CS)
MCCSL
10%
90%
th(CS)
10%
NOTE A: Chip selection is defined as both MCCS and MCRW active.
Figure 3–5. Microcontroller Interface Timing Requirements
(Intel Configuration Write Cycle, MTS [1:0] = 00)
3–6