CC1350_16 Datasheet, PDF (27/61 Pages) Texas Instruments – SimpleLink Ultra-Low-Power Dual-Band Wireless MCU

www.ti.com
CC1350
SWRS183A – JUNE 2016 – REVISED NOVEMBER 2016
5.21.4 Flash Memory Characteristics
T_c = 25°C, V_DDS = 3.0 V, unless otherwise noted.
PARAMETER
TEST CONDITIONS
MIN
Supported flash erase cycles before failure
100
Flash page or sector erase current
Flash page or sector erase time⁽¹⁾
Average delta current
Flash page or sector size
Flash write current
Flash write time⁽¹⁾
Average delta current, 4 bytes at a time
4 bytes at a time
(1) This number is dependent on flash aging and increases over time and erase cycles.
5.21.5 Synchronous Serial Interface (SSI) Characteristics
T_c = 25°C, V_DDS = 3.0 V, unless otherwise noted.
PARAMETER
NO.
PARAMETER
MIN
S1
t_{clk_per}
SSIClk cycle time
12
S2 ⁽¹⁾
t_{clk_high}
SSIClk high time
S3 ⁽¹⁾
t_{clk_low}
SSIClk low time
(1) See the SSI timing diagrams, Figure 5-1, Figure 5-2, and Figure 5-3.
TYP
0.5 × t_{clk_per}
0.5 × t_{clk_per}
TYP MAX UNIT
k Cycles
12.6
mA
8
ms
4
KB
8.15
mA
8
µs
MAX
UNIT
65024 system clocks
SSIClk
SSIFss
S1
S2
S3
SSITx
SSIRx
MSB
4 to 16 bits
LSB
Figure 5-1. SSI Timing for TI Frame Format (FRF = 01), Single Transfer Timing Measurement
Copyright © 2016, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Links: CC1350
Specifications
27