CC1350_16 Datasheet, PDF (16/61 Pages) Texas Instruments – SimpleLink Ultra-Low-Power Dual-Band Wireless MCU

CC1350
SWRS183A – JUNE 2016 – REVISED NOVEMBER 2016
www.ti.com
5.5 RF Characteristics
over operating free-air temperature range (unless otherwise noted)
PARAMETER
Frequency bands⁽¹⁾
(1) For more information, see the CC1350 SimpleLink Wireless MCU Silicon Errata.
MIN
(287)
(359)
431
(718)
861
2152
TYP MAX UNIT
(351)
(439)
527
(878)
MHz
1054
2635
5.6 Receive (RX) Parameters, 861 MHz to 1054 MHz
Measured on the Texas Instruments CC1350_7XD-Dual Band reference design with T_c = 25°C, V_DDS = 3.0 V, DC-DC
enabled, f_RF = 868 MHz, unless otherwise noted. All measurements are performed at the antenna input with a combined RX
and TX path.
PARAMETER
TEST CONDITIONS
MIN
TYP MAX UNIT
Data rate
50
kbps
Data rate offset tolerance,
IEEE 802.15.4g PHY
50 kbps, GFSK, 25-kHz deviation, 100-kHz RX
bandwidth (same modulation format as IEEE 802.15.4g
mandatory mode), BER = 10^–3
1600
ppm
Data rate step size
1.5
bps
Digital channel filter programmable
bandwidth
Using VCO divide by 5 setting
40
4000 kHz
Receiver sensitivity, 50 kbps
50 kbps, GFSK, 25-kHz deviation, 100-kHz RX
bandwidth (same modulation format as IEEE 802.15.4g
mandatory mode), BER = 10^–2 868 MHz and 915 MHz
–109
dBm
Receiver sensitivity, 50 kbps
50 kbps, GFSK, 25-kHz deviation, 100-kHz RX
bandwidth (same modulation format as IEEE 802.15.4g
mandatory mode), BER = 10^–2 868 MHz and 915 MHz.
Measured on CC1310EM-7XD-7793.
–110
dBm
Receiver saturation
50 kbps, GFSK, 25-kHz deviation, 100-kHz RX
bandwidth (same modulation format as IEEE 802.15.4g
mandatory mode), BER = 10^–2
10
dBm
Selectivity, ±200 kHz, 50 kbps
Wanted signal 3 dB above sensitivity limit. 50 kbps,
GFSK, 25-kHz deviation, 100-kHz RX bandwidth (same
modulation format as IEEE 802.15.4g mandatory
mode), BER = 10^–2
44, 47
dB
Selectivity, ±400 kHz, 50 kbps
Wanted signal 3 dB above sensitivity limit. 50 kbps,
GFSK, 25-kHz deviation, 100-kHz RX bandwidth (same
modulation format as IEEE 802.15.4g mandatory
mode), BER = 10^–2
48, 53
dB
Blocking ±1 MHz, 50 kbps
Wanted signal 3 dB above sensitivity limit. 50 kbps,
GFSK, 25-kHz deviation, 100-kHz RX bandwidth (same
modulation format as IEEE 802.15.4g mandatory
mode), BER = 10^–2
59, 62
dB
Blocking ±2 MHz, 50 kbps
Wanted signal 3 dB above sensitivity limit. 50 kbps,
GFSK, 25-kHz deviation, 100-kHz RX bandwidth (same
modulation format as IEEE 802.15.4g mandatory
mode), BER = 10^–2
64, 65
dB
Blocking ±5 MHz, 50 kbps
Wanted signal 3 dB above sensitivity limit. 50 kbps,
GFSK, 25-kHz deviation, 100-kHz RX bandwidth (same
modulation format as IEEE 802.15.4g mandatory
mode), BER = 10^–2
67, 68
dB
Blocking ±10 MHz, 50 kbps
Wanted signal 3 dB above sensitivity limit. 50 kbps,
GFSK, 25-kHz deviation, 100-kHz RX bandwidth (same
modulation format as IEEE 802.15.4g mandatory
mode), BER = 10^–2
76, 76
dB
16
Specifications
Submit Documentation Feedback
Product Folder Links: CC1350
Copyright © 2016, Texas Instruments Incorporated