AMC1210_14 Datasheet, PDF (2/54 Pages) Texas Instruments – Quad Digital Filter for 2nd-Order Delta-Sigma Modulator

AMC1210
SBAS372D – APRIL 2006 – REVISED MAY 2009.............................................................................................................................................................. www.ti.com
This integrated circuit can be damaged by ESD. Texas Instruments recommends that all integrated circuits be handled with
appropriate precautions. Failure to observe proper handling and installation procedures can cause damage.
ESD damage can range from subtle performance degradation to complete device failure. Precision integrated circuits may be more
susceptible to damage because very small parametric changes could cause the device not to meet its published specifications.
ORDERING INFORMATION⁽¹⁾
PRODUCT
AMC1210
PACKAGE
PACKAGE-LEAD DESIGNATOR
SPECIFIED
TEMPERATURE
RANGE
QFN-40
RHA
–40°C to +125°C
PACKAGE
MARKING
AMC1210I
ORDERING
NUMBER
AMC1210IRHAT
AMC1210IRHAR
TRANSPORT MEDIA,
QUANTITY
Tape and Reel, 250
Tape and Reel, 2500
(1) For the most current package and ordering information see the Package Option Addendum at the end of this document, or see the TI
web site at www.ti.com.
ABSOLUTE MAXIMUM RATINGS
Over operating free-air temperature range, unless otherwise noted.⁽¹⁾
Supply voltage, all supplies (AVDD, BVDD, CVDD, DVDD) to GND
Digital input to GND
Ground voltage difference, AGND to GND
Input current to any pin except supply pins
Power dissipation
Operating virtual junction temperature range, T_J
Operating free-air temperature range, T_A
Storage temperature range, T_STG
AMC1210
UNIT
–0.3 to +6
V
GND – 0.3 to BVDD + 0.3
V
±0.3
V
–10 to +10
mA
See Dissipation Ratings Table
–40 to +150
°C
–40 to +125
°C
–65 to +150
°C
(1) Stresses beyond those listed under absolute maximum ratings may cause permanent damage to the device. These are stress ratings
only, and functional operation of the device at these or any other conditions beyond those indicated under the Electrical Characteristics
is not implied. Exposure to absolute maximum rated conditions for extended periods may affect device reliability.
DISSIPATION RATINGS
PACKAGE
RHA ⁽¹⁾
T_A ≤ +25°C
POWER RATING
3787mW
DERATING FACTOR
ABOVE T_A = +25°C
30.3mW/°C
T_A = +70°C
POWER RATING
2424mW
(1) The thermal resistance (junction-to-ambient) of the RHA package is 32°C/W.
T_A = +85°C
POWER RATING
1969mW
T_A = +125°C
POWER RATING
758mW
2
Submit Documentation Feedback
Product Folder Link(s): AMC1210
Copyright © 2006–2009, Texas Instruments Incorporated