|
BQ4050 Datasheet, PDF (13/53 Pages) Texas Instruments – CEDV Gas Gauge and Protection Solution | |||
|
◁ |
www.ti.com
bq4050
SLUSC67A â MARCH 2016 â REVISED MARCH 2016
Electrical Characteristics: CHG, DSG FET Drive (continued)
Typical values stated where TA = 25°C and VCC = 14.4 V, Min/Max values stated where TA = â40°C to 85°C and VCC =
2.2 V to 26 V (unless otherwise noted)
PARAMETER
TEST CONDITIONS
MIN
TYP
MAX UNIT
VDSG from VDSG(ON)(TYP) to 1 V, VBAT ⥠2.2 V, CL = 4.7 nF
between DSG and PACK, 5.1 kΩ between DSG and CL,
10 MΩ between PACK and DSG
tF
Fall time
VCHG from VCHG(ON)(TYP) to 1 V, VBAT ⥠2.2 V, CL = 4.7
nF between CHG and BAT, 5.1 kΩ between CHG and
CL, 10 MΩ between BAT and CHG
40
300
µs
40
200
6.19 Electrical Characteristics: PCHG FET Drive
Typical values stated where TA = 25°C and VCC = 14.4 V, Min/Max values stated where TA = â40°C to 85°C and VCC =
2.2 V to 26 V (unless otherwise noted)
PARAMETER
TEST CONDITIONS
MIN
TYP
MAX UNIT
V(FETON)
Output voltage,
PCHG on
VPCHG(ON) = VVCC â VPCHG, 10 MΩ between VCC and
PCHG
6
7
8V
V(FETOFF)
Output voltage,
PCHG off
VPCHG(OFF) = VVCC â VPCHG, 10 MΩ between VCC and
PCHG
â0.4
0.4 V
VPCHG from 10% to 90% VPCHG(ON)(TYP), VVCC ⥠8 V, CL =
tR
Rise time
4.7 nF between PCHG and VCC, 5.1 kΩ between PCHG
and CL, 10 MΩ between VCC and CHG
VPCHG from 90% to 10% VPCHG(ON)(TYP), VCC ⥠8 V, CL =
tF
Fall time
4.7 nF between PCHG and VCC, 5.1 kΩ between PCHG
and CL, 10 MΩ between VCC and CHG
40
200 µs
40
200 µs
6.20 Electrical Characteristics: FUSE Drive
Typical values stated where TA = 25°C and VCC = 14.4 V, Min/Max values stated where TA = â40°C to 85°C and VCC =
2.2 V to 26 V (unless otherwise noted)
PARAMETER
TEST CONDITIONS
MIN
TYP
MAX UNIT
VOH
VIH
IAFEFUSE(PU)
Output voltage
high
High-level input
Internal pullup
current
VBAT ⥠8 V, CL = 1 nF, IAFEFUSE = 0 µA
VBAT < 8 V, CL = 1 nF, IAFEFUSE = 0 µA
VBAT ⥠8 V, VAFEFUSE = VSS
6
VBAT â 0.1
1.5
7
8.65
V
VBAT
2.0
2.5 V
150
330 nA
RAFEFUSE
CIN
tDELAY
Output impedance
Input capacitance
Fuse trip detection
delay
2
2.6
3.2 kΩ
5
pF
128
256 µs
tRISE
Fuse output rise
time
VBAT ⥠8 V, CL = 1 nF, VOH = 0 V to 5 V
5
20 µs
6.21 Electrical Characteristics: Internal Temperature Sensor
Typical values stated where TA = 25°C and VCC = 14.4 V, Min/Max values stated where TA = â40°C to 85°C and VCC =
2.2 V to 26 V (unless otherwise noted)
PARAMETER
TEST CONDITIONS
MIN
TYP
MAX UNIT
VTEMP
Internal temperature VTEMPP
sensor voltage drift VTEMPP â VTEMPN, assured by design
â1.9
0.177
â2.0
0.178
â2.1
mV/°C
0.179
Copyright © 2016, Texas Instruments Incorporated
Product Folder Links: bq4050
Submit Documentation Feedback
13
|
▷ |