TMS320DM6467CCUT7 Datasheet, PDF (66/355 Pages) Texas Instruments – Digital Media System-on-Chip

TMS320DM6467
SPRS403H – DECEMBER 2007 – REVISED JUNE 2012
3.7.22 Pulse-Width Modulation (PWM)
www.ti.com
Table 3-26. PWM Terminal Functions
SIGNAL
TYPE ⁽¹⁾
NAME
NO.
OTHER ⁽²⁾
DESCRIPTION
PWM0
PWM0/
CRG0_PO/
TS1_ENAO
W17 O/Z
–
DV_DD33
This pin is multiplexed between PWM0, CRGEN0, and TSIF1.
When not overridden by CRGEN or TSIF1 output muxing (PINMUX0.CRGMUX ≠
10x and PINMUX0.TSSOMUX ≠ 11), this pin is the pulse width modulation 0 output,
PWM0 (O/Z).
PWM1
PWM1/
TS1_DOUT
W18 O/Z
–
DV_DD33
This pin is multiplexed between PWM1 and TSIF1.
When not overridden by TSIF1 output muxing (PINMUX0.TSSOMUX ≠ 11), this pin
is the pulse width modulation 1 output, PWM1 (O/Z).
(1) I = Input, O = Output, Z = High impedance, S = Supply voltage, GND = Ground, A = Analog signal
(2) Specifies the operating I/O supply voltage for each signal
66
Device Overview
Copyright © 2007–2012, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Link(s): TMS320DM6467