MSP430F551X_1 Datasheet, PDF (62/115 Pages) Texas Instruments – MIXED SIGNAL MICROCONTROLLER

MSP430F551x
MSP430F552x
SLAS590D – OCTOBER 2009 – REVISED APRIL 2010
www.ti.com
PMM, SVM High Side
over recommended ranges of supply voltage and operating free-air temperature (unless otherwise noted)
PARAMETER
TEST CONDITIONS
MIN
TYP
I_(SVMH)
SVM_H current consumption
SVMHE = 0, DV_CC = 3.6 V
SVMHE= 1, DV_CC = 3.6 V, SVMHFP = 0
SVMHE = 1, DV_CC = 3.6 V, SVMHFP = 1
SVMHE = 1, SVSMHRRL = 0
0
200
1.5
1.62
1.74
SVMHE = 1, SVSMHRRL = 1
1.88
1.94
SVMHE = 1, SVSMHRRL = 2
2.07
2.14
V_(SVMH)
SVM_H on/off voltage level⁽¹⁾
SVMHE = 1, SVSMHRRL = 3
SVMHE = 1, SVSMHRRL = 4
SVMHE = 1, SVSMHRRL = 5
2.20
2.30
2.32
2.40
2.52
2.70
SVMHE = 1, SVSMHRRL = 6
2.90
3.10
SVMHE = 1, SVSMHRRL = 7
2.90
3.10
SVMHE = 1, SVMHOVPE = 1
3.75
SVMHE = 1, dV_DVCC/dt = 10 mV/µs,
SVMHFP = 1
2.5
t_pd(SVMH) SVM_H propagation delay
SVMHE = 1, dV_DVCC/dt = 1 mV/µs,
SVMHFP = 0
20
t_(SVMH)
SVM_H on/off delay time
SVMHE = 0 → 1
SVMHFP = 1
SVMHE = 0 → 1
SVMHFP = 0
12.5
100
MAX UNIT
nA
nA
µA
1.85
2.07
2.28
2.42
2.55 V
2.88
3.23
3.23
µs
µs
(1) The SVM_H settings available depend on the VCORE (PMMCOREVx) setting. Please refer to the Power Management Module and
Supply Voltage Supervisor chapter in the MSP430x5xx Family User's Guide (SLAU208) on recommended settings and usage.
PMM, SVS Low Side
over recommended ranges of supply voltage and operating free-air temperature (unless otherwise noted)
PARAMETER
TEST CONDITIONS
MIN
TYP
SVSLE = 0, PMMCOREV = 2
0
I_(SVSL)
SVS_L current consumption
SVSLE = 1, PMMCOREV = 2, SVSLFP = 0
200
SVSLE = 1, PMMCOREV = 2, SVSLFP = 1
1.5
SVSLE = 1, dV_CORE/dt = 10 mV/µs,
SVSLFP = 1
2.5
t_pd(SVSL)
SVS_L propagation delay
SVSLE = 1, dV_CORE/dt = 1 mV/µs,
SVSLFP = 0
20
t_(SVSL)
SVS_L on/off delay time
SVSLE = 0 → 1
SVSLFP = 1
SVSLE = 0 → 1
SVSLFP = 0
12.5
100
MAX
UNIT
nA
nA
µA
µs
µs
62
Submit Documentation Feedback
Copyright © 2009–2010, Texas Instruments Incorporated