MSP430F551X_1 Datasheet, PDF (49/115 Pages) Texas Instruments – MIXED SIGNAL MICROCONTROLLER

MSP430F551x
MSP430F552x
www.ti.com
SLAS590D – OCTOBER 2009 – REVISED APRIL 2010
Recommended Operating Conditions
V_CC
V_{CC, USB}
V_SS
T_A
T_J
C_VCORE
C_DVCC/
C_VCORE
f_SYSTEM
f_{SYSTEM_USB}
USB_wait
Supply voltage during program execution and flash
programming(AV_CC = DV_CC1/2 = DV_CC)⁽¹⁾
Supply voltage during USB operation, USB PLL disabled
USB_EN = 1, UPLLEN = 0
Supply voltage during USB operation, USB PLL enabled⁽²⁾
USB_EN = 1, UPLLEN = 1
Supply voltage (AV_SS = DV_SS1/2 = DV_SS)
Operating free-air temperature
Operating junction temperature
Capacitor at VCORE
PMMCOREVx = 0
PMMCOREVx = 0, 1
PMMCOREVx = 0, 1, 2
PMMCOREVx = 0, 1, 2, 3
PMMCOREVx = 0
PMMCOREVx = 0, 1
PMMCOREVx = 0, 1, 2
PMMCOREVx = 0, 1, 2, 3
PMMCOREVx = 2
PMMCOREVx = 2, 3
I version
I version
Capacitor ratio of DVCC to VCORE
Processor frequency (maximum MCLK frequency)⁽³⁾
(see Figure 1)
Minimum processor frequency for USB operation
Wait state cycles during USB operation
PMMCOREVx = 0
1.8 V ≤ V_CC ≤ 3.6 V
(default condition)
PMMCOREVx = 1
2.0 V ≤ V_CC ≤ 3.6 V
PMMCOREVx = 2
2.2 V ≤ V_CC ≤ 3.6 V
PMMCOREVx = 3
2.4 V ≤ V_CC ≤ 3.6 V
MIN NOM MAX UNIT
1.8
3.6 V
2.0
3.6 V
2.2
3.6 V
2.4
3.6 V
1.8
3.6 V
2.0
3.6 V
2.2
3.6 V
2.4
3.6 V
2.2
3.6 V
2.4
3.6 V
0
V
–40
85 °C
–40
85 °C
470
nF
10
0
8.0
0
12.0
MHz
0
20.0
0
25.0
1.5
16
MHz
cycles
(1) It is recommended to power AV_CC and DV_CC from the same source. A maximum difference of 0.3 V between AV_CC and DV_CC can be
tolerated during power up and operation.
(2) USB operation with USB PLL enabled requires PMMCOREVx ≥ 2 for proper operation.
(3) Modules may have a different maximum input clock specification. Refer to the specification of the respective module in this data sheet.
25
3
20
2
2, 3
12
1
1, 2
1, 2, 3
8
0
0, 1 0, 1, 2
0, 1, 2, 3
0
1.8
2.0
2.2
2.4
3.6
Supply Voltage - V
The numbers within the fields denote the supported PMMCOREVx settings.
Figure 1. Maximum System Frequency
Copyright © 2009–2010, Texas Instruments Incorporated
Submit Documentation Feedback
49