TMS320DM6435 Datasheet, PDF (55/252 Pages) Texas Instruments – Digital Media Processor

www.ti.com
TMS320DM6435
Digital Media Processor
SPRS344B – NOVEMBER 2006 – REVISED NOVEMBER 2007
Table 2-24. GPIO Terminal Functions
SIGNAL
NAME
ZWT
NO.
ZDU
NO.
TYPE ⁽¹⁾
OTHER ^{(2) (3)}
DESCRIPTION
GPIO
97 out of 111 GPIO pins on the DM6435 device are multiplexed with other peripherals pin functions (e.g., VPFE, HPI, VLYNQ,
EMAC/MDIO, McASP0, McBSP0, Timer 0, Timer 1, UART0, UART1, PWM0, PWM1, PWM2, EMIFA, and the CLKOUT0 pin), see the
peripheral-specific Terminal Functions tables for the GPIO multiplexing.
(1) I = Input, O = Output, Z = High impedance, S = Supply voltage, GND = Ground, A = Analog signal
(2) IPD = Internal pulldown, IPU = Internal pullup. For more detailed information on pullup/pulldown resistors and situations where external
pullup/pulldown resistors are required, see Section 3.9.1, Pullup/Pulldown Resistors.
(3) Specifies the operating I/O supply voltage for each signal
Submit Documentation Feedback
Device Overview
55