CC2564_15 Datasheet, PDF (41/47 Pages) Texas Instruments – Bluetooth® and Dual-Mode Controller

www.ti.com
7.2 Empty Tape Portion
Figure 7-2 shows the empty portion of the carrier tape.
Empty portion
Device on tape portion
CC256x
SWRS121D – JULY 2012 – REVISED JANUARY 2014
Empty portion
End
Start
270-mm MIN
User direction of feed
Figure 7-2. Carrier Tape and Pockets
The length is to extend
so that no unit is visible
on the outer layer of tape.
swrs064-001
7.3 Device Quantity and Direction
When pulling out the tape, the A1 corner is on the left side (see Figure 7-3).
Carrier tape Sprocket hole
A1 corner
Cover tape
Embossment
User direction of feed
Figure 7-3. Direction of Device
7.4 Insertion of Device
Figure 7-4 shows the insertion of the device.
insert_swrs064
Figure 7-4. Insertion of Device
SWRS064-002
Copyright © 2012–2014, Texas Instruments Incorporated
Submit Documentation Feedback
Chip Packaging and Ordering
41