CC2564_15 Datasheet, PDF (1/47 Pages) Texas Instruments – Bluetooth® and Dual-Mode Controller

CC256x
www.ti.com
SWRS121D – JULY 2012 – REVISED JANUARY 2014
Bluetooth^® and Dual-Mode Controller
1 Bluetooth and Dual-Mode Controller
1.1 Features
1234567
• Single-Chip Bluetooth Solution Integrating
Bluetooth Basic Rate (BR)/Enhanced Data Rate
(EDR)/Low Energy (LE) Features Fully
Compliant With the Bluetooth 4.0 Specification
Up to the HCI Layer
• BR/EDR Features Include:
– Up to 7 Active Devices
– Scatternet: Up to 3 Piconets Simultaneously,
1 as Master and 2 as Slaves
– Up to 2 SCO Links on the Same Piconet
– Support for All Voice Air-Coding –
Continuously Variable Slope Delta (CVSD),
A-Law, μ-Law, and Transparent (Uncoded)
• CC2560B/CC2564B Devices Provide an
Assisted Mode for HFP 1.6 Wideband Speech
(WBS) Profile or A2DP Profile to Reduce Host
Processing and Power
• LE Features Include:
– Support of Up to 10 (CC2564 and CC2564B)
Simultaneous Connections
– Multiple Sniff Instances Tightly Coupled to
Achieve Minimum Power Consumption
– Independent Buffering for LE Allows Large
Numbers of Multiple Connections Without
Affecting BR/EDR Performance.
– Built-In Coexistence and Prioritization
Handling for BR/EDR and LE
• Flexibility for Easy Stack Integration and
Validation Into Various Microcontrollers, Such
as MSP430™ and ARM^® Cortex™-M3 and
Cortex™-M4 MCUs
• Highly Optimized for Low-Cost Designs:
– Single-Ended 50-Ω RF Interface
– Package Footprint: 76 Pins, 0.6-mm Pitch,
8.10-mm x 8.10-mm mrQFN
• Best-in-Class Bluetooth (RF) Performance (TX
Power, RX Sensitivity, Blocking)
– Class 1.5 TX Power Up to +12 dBm
– Internal Temperature Detection and
Compensation to Ensure Minimal Variation
in RF Performance Over Temperature, No
External Calibration Required
– Improved Adaptive Frequency Hopping
(AFH) Algorithm With Minimum Adaptation
Time
– Provides Longer Range, Including 2x Range
Over Other BLE-Only Solutions
– ROM Spin to Enable Offload Host and Save
Current With Assisted Audio (SBC Encode
and Decode On Chip)
• Advanced Power Management for Extended
Battery Life and Ease of Design:
– On-Chip Power Management, Including
Direct Connection to Battery
– Low Power Consumption for Active,
Standby, and Scan Bluetooth Modes
– Shutdown and Sleep Modes to Minimize
Power Consumption
• Physical Interface:
– Fully Programmable Digital PCM-I2S Codec
Interface
• CC256x Bluetooth Hardware Evaluation Tool:
PC-Based Application to Evaluate RF
Performance of the Device and Configure
Service Pack
• Device Pin-to-Pin Compatible With Previous
Devices or Modules
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
MSP430, DRP are trademarks of Texas Instruments.
2
Cortex is a trademark of ARM Limited.
3
ARM7TDMIE is a registered trademark of ARM Limited.
4
ARM is a registered trademark of ARM Physical IP, Inc.
5
iPod is a registered trademark of Apple, Inc.
6
Bluetooth is a registered trademark of Bluetooth SIG, Inc.
7
PRODUCTION DATA information is current as of publication date. Products conform to
specifications per the terms of the Texas Instruments standard warranty. Production
processing does not necessarily include testing of all parameters.
Copyright © 2012–2014, Texas Instruments Incorporated