TMS320DM6467 Datasheet, PDF (117/334 Pages) Texas Instruments – Digital Media System-on-Chip

www.ti.com
TMS320DM6467
Digital Media System-on-Chip
SPRS403 – DECEMBER 2007
3.7.3.7 TSIF1 Output Signal Muxing (Serial Only)
The TSIF 1 (TS1) output signals are muxed with either the VP_DOUT signals or UART0, UART2, and
PWM signals as selected by TSSOMUX (PINMUX0 register). The TS1 output pin muxing is shown in
Table 3-31.
Table 3-31. TSIF1 Serial Output Pin Muxing
TSSOMUX = 0x
VP_CLKIN3
VP_DOUT11
VP_DOUT10
VP_DOUT9
VP_DOUT8
URIN0/GP[8] ⁽¹⁾
UCTS2/GP[42]/CRG0_VCXI ⁽²⁾
PWM0/CRG0_PO ⁽³⁾
PWM1
PIN FUNCTION
TSSOMUX = 10
TS1_CLKO
TS1_DOUT
TS1_PSTO
TS1_ENAO
TS1_WAITIN
URIN0/GP[8] ⁽¹⁾
UCTS2/GP[42]/CRG0_VCXI ⁽²⁾
PWM0/CRG0_PO ⁽³⁾
PWM1
TSSOMUX = 11
TS1_CLKO
VP_DOUT11
VP_DOUT10
VP_DOUT9
VP_DOUT8
TS1_WAITIN
TS1_PSTO
TS1_ENAO
TS1_DOUT
(1) Function will be determined by UART0CTL bit field value in the PINMUX1 register.
(2) Function will be determined by UART2CTL and CRGMUX bit field values in the PINMUX1 and PINMUX0 registers, respectively.
(3) Function will be determined by CRGMUX bit field value in the PINMUX0 register.
Submit Documentation Feedback
Device Configurations 117