English
Language : 

TLK2711-SP Datasheet, PDF (11/21 Pages) Texas Instruments – 1.6-Gbps to 2.5-Gbps Class V Transceiver
◁
TLK2711-SP
www.ti.com .............................................................................................................................................................. SGLS307D – JULY 2006 – REVISED JULY 2009
ABSOLUTE MAXIMUM RATINGS
over operating temperature range (unless otherwise noted)(1)
VDD Supply voltage range(2)
Voltage range
TXD0–TXD15, ENABLE, TXCLK, TKMSB,
TKLSB, LOOPEN, PRBSEN, LCKREFN,
PRE
All other terminals
PD Package power dissipation
Tstg Storage temperature range
Electrostatic discharge
HBM
Tc Characterized case operating temperature range HFG
UNIT
–0.3 V to 3 V
–0.3 V to 4 V
–0.3 V to VDD , VDDA + 0.3 V
See Dissipation Rating Table
–65°C to 150°C
2 kV
–55°C to 125°C
(1) Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings
only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating
conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
(2) All voltage values, except differential I/O bus voltages, are stated with respect to network ground.
ELECTRICAL CHARACTERISTICS
over recommended operating conditions
PARAMETER
VDD
Supply voltage
ICC
Supply current
PD
Power dissipation
Shutdown current
PLL startup lock time
Data acquisition time
Tc
Operating case temperature
TEST CONDITIONS
Frequency range 1.6 Gbps to 2 Gbps
Frequency range 1.6 Gbps to 2.5 Gbps
Frequency = 1.6 Gbps, PRBS pattern
Frequency = 2.5 Gbps, PRBS pattern
Frequency = 1.6 Gbps, PRBS pattern
Frequency = 2.5 Gbps, PRBS pattern
Frequency = 2.5 Gbps, PRBS pattern
Enable = 0, VDDA, VDD terminals, VDD = MAX
VDD, VDDC = 2.375 V
MIN
2.375
2.5
–55
NOM
2.5
2.6
110
160
275
400
3
0.1
1024
MAX
2.625
2.7
UNIT
V
mA
mW
550
mA
0.4 ms
Bits
125 °C
REFERENCE CLOCK (TXCLK) TIMING REQUIREMENTS
over recommended operating conditions (unless otherwise noted)
PARAMETER
Frequency
Frequency tolerance
Duty cycle
Jitter
TEST CONDITIONS
Receiver data rate/20
Peak to peak
MIN
–100
–100
40%
TYP
50%
MAX
100
100
60%
40
UNIT
ppm
ppm
ps
Copyright © 2006–2009, Texas Instruments Incorporated
Product Folder Link(s): TLK2711-SP
Submit Documentation Feedback
11
 ▷