|
S-1701 Datasheet, PDF (5/70 Pages) Seiko Instruments Inc – HIGH RIPPLE-REJECTION LOW DROPOUT CMOS VOLTAGE REGULATOR WITH RESET FUNCTION | |||
|
◁ |
HIGH RIPPLE-REJECTION LOW DROPOUT CMOS VOLTAGE REGULATOR WITH RESET FUNCTION
Rev.2.4_00
S-1701 Series
 Product Name Structure
⢠The product types, output voltage, detection voltage, and package types for the S-1701 Series can be
selected at the userâs request. Refer to the â1. Product nameâ for the meanings of the characters in the
product name, â2. Function list according to product typeâ for product types, and â3. Product name
listâ for the full product names.
1. Product name
S-1701 x
xx
xx - xxxx
G
Package abbreviation and IC packing
specifications*1
M5T1: SOT-23-5, tape product
U5T1: SOT-89-5, tape product
Detection voltage*2
15 to 55
(e.g., when the output voltage is 1.5 V,
it is expressed as 15.)
Output voltage
15 to 50
(e.g., when the output voltage is 1.5 V,
it is expressed as 15.)
Product type*3
A to Z (I and O are not provided)
*1. Refer to the taping specifications at the end of this book.
*2. In the S-1701D to S-1701F, S-1701K to S-1701M, and S-1701U to S-1701W types (that detect
output voltage), a reset signal may be output due to the undershoot of the output voltage when the
input voltage or load current changes transiently. Therefore, set the detection voltage after
sufficient evaluation using actual devices.
*3. Refer to the â2. Function list according to product typeâ.
Seiko Instruments Inc.
5
|
▷ |