BD9406KS2 Datasheet, PDF (8/38 Pages) Rohm – 28bit Audio DSP with Built-in 2ch ADC, 6ch DAC and ASRC

BU9406KS2
Technical Note
Write-in Procedure
Step Clock
Master
1
Start Condition
2
7 Slave Address
3
1 R/W (0)
4
1
5
8 Select Address
6
1
7
8 Data
8
1
9
Stop Condition
Slave(BU9406KS2)
Note
Acknowledge
Acknowledge
Acknowledge
&h80 (&h82, &h84, &h86)
Write-in target register: 8bit
8bit write-in data
○When transmitting continuous data, the auto-increment function moves the select address up by one.
Repeat steps 7 and 8.
1-2. Data Read-out
During read-out, the corresponding read-out address is first written into the &hD0 address register (&h20h in the example).
In the following stream, the data is read out after the slave address. Do not return an acknowledge after completing the
reception.
S Slave Address A Request Address A Select Address A P
（ex.） 80h
D0h
20h
S Slave Address A Data 1
（ex.） 81h
**h
: Master to Slave,
A Data 2
A
A Data N
**h
**h
: Slave to Master, A: With acknowledge, Ā: Without acknowledge
ĀP
Read-out Procedure
Step Clock
Master
1
Start Condition
2
7 Slave Address
3
1 R/W (0)
4
1
5
8 Request Address
6
1
7
8 Select Address
8
1
9
1 Stop Condition
10
1 Start Condition
11
7 Slave Address
12
1 R/W (1)
13
1
14
8
15
1 Acknowledge
16
Stop Condition
Slave(BU9406KS2)
Note
Acknowledge
Acknowledge
Acknowledge
&h80 (&h82, &h84, &h86)
I²C read-out address
&hD0
Read-out target register: 8bit
Acknowledge
Data
&h81 (&h82, &h85, &h87)
8bit read-out data
○When transmitting continuous data, the auto-increment function moves up the select address by one.
Repeat steps 14 and 15.
www.rohm.com
© 2012 ROHM Co., Ltd. All rights reserved.
8/34
2012.03 - Rev.A