BU9414FV Datasheet, PDF (14/61 Pages) Rohm – 32bit Audio DSP

BU9414FV
Technical Note
4. Digital sound processing（DSP）
BU9414FV’s Digital Sound Processing（DSP） consists of special hardware most suitable to Thin TV.
BU9414FV uses this special DSP to perform the following processing.
Prescaler, DC Cut HPF, Channel Mixer, P²Volume（Perfect Pure Volume）, BASS, MIDDLE, TREBLE,
Pseudo Stereo, Surround, P²Bass, Pseudo Bass, P²Treble, 7 Band・Parametric Equalizer, Master Volume, L/R
Balance, PostScaler, Output Clipper.
DSP Outline and Signal Flow
Data width：
Machine cycle：
Multiplier：
Adder：
Data RAM：
Coefficient RAM：
Sampling frequency：
Master clock：
32 bit （DATA RAM）
40.7ns （512fs, fs=48kHz）
32×24 → 56 bit
32＋32 → 32 bit
256×32 bit
128×24 bit
fs=48kHz
512fs （24.576MHz, fs=48kHz）
Data
RAM
Input
0
MUX
MUX
M
U
X
Coefficient
operation
Circuit
Coefficient
RAM
Decoder
circuit
ADD
Acc
Digital signal from 16bit to 24bit is inputted to DSP,
and it is extended by +8bit（+42dB） as overflow margin on the upper side.
The clip process is performed in DSP when the process exceeding this range is performed.
Output
Input1
Input2
Pre
scaler
DC cut
HPF
Channel
mixer
P²Volume Surround
BASS
MIDDLE
TREBLE
Pseudo
BASS
Digital Audio Processing Signal Flow
P²Bass
P²Treble
Scaler
7Band
Parametric
EQ
EVR
＆
Blance
EVR
＆
Blance
2Band
DRC
＆
Clipper
Post
scaler
＆
Clipper
Main output
Sub output
4-1. Prescaler
When digital signal is inputted to audio DSP, if the level is full scale input and the process of surround or equalizer is
performed, then it overflows, therefore the input gain is adjusted by prescaler.
Adjustable range is +24dB to -103dB and can be set by the step of 0.5dB.
Prescaler does not incorporate the smooth transition function.
Default = 30h
Select Address
&h20 [ 7：0 ]
Operational explanation
command
00
01
gain
+24dB
+23.5dB
30
0dB
31
-0.5dB
32
-1dB
FE
-103dB
FF
-∞
www.rohm.com
© 2012 ROHM Co., Ltd. All rights reserved.
14/57
2012.03 - Rev.A