RXC101 Datasheet, PDF (1/33 Pages) RF Monolithics, Inc – Multi-channel High data rate Programmable

Complies with Directive 2002/95/EC (RoHS)
Product Overview
RXC101 is a highly integrated single chip, zero-IF, multi-channel, low
power, high data rate RF receiver designed to operate in the unlicensed
315/433/868 and 915 MHz frequency bands. All critical RF and baseband
functions are completely integrated in the chip, thus minimizing external
component count and simplifying design-ins. Its small size with low power
consumption makes it ideal for various short range radio applications.
The RXC101 supports two modes – Micro controller mode and Standalone
mode. In the Micro controller mode, the use of a generic 10MHz crystal
and a low-cost microcontroller is all that is needed to create a complete
Receiver link. Simple short range radio applications can be supported by
using the RXC101 in the Standalone mode, which allows complete receiver
operation without the use of a microcontroller.
Key Features
• Modulation: OOK/FSK (Frequency Hopping Spread Spectrum
capability)
• Operating frequency: 315/433/868/915 MHz
• High Sensitivity: (-113dBm)
• Low current consumption (RX current ~ 8mA)
• Wide Operating supply voltage: 2.2 to 5.4V
• Low standby current (0.1uA)
• FSK Data rate up to 256kbps
• Support for Multiple Channels
• [315/433 Bands]: 380 Channels (25kHz)
• [868 Band]: 761 Channels (25kHz)
• [915 Band]: 1040 Channels (25kHz)
• Generic 10MHz Xtal reference
• Processor or Standalone Operation Mode
• Automatic Frequency Alignment
• Programmable Analog/Digital Baseband Filter
• Programmable Data Rate
• Programmable Input LNA Gain
• Programmable Clock Output Frequency
• Programmable Wake-up Timer with programmable Duty Cycle
• Programmable Crystal Load Capacitance
• Programmable, Positive/Negative FSK Deviation
• Programmable Push Button Control
• Internal Valid Data Recognition
• Integrated PLL, IF & Baseband Circuitry
• Integrated Selectable Analog/Digital RSSI
• Integrated, Programmable Low Battery Voltage Detector
16-TSSOP package
• Integrated Crystal Oscillator
• Integrated Clock Recovery
• Standard SPI interface
• External Wake-up Events
• External Processor Interrupt pin
• Receive FIFO or External Pin
• TTL/CMOS Compatible I/O pins
• No Manual Adjustment Needed for Production
• Very few external components requirement
• Small size plastic package: 16-pin TSSOP
• Standard 13 inch reel, 2000 pieces.
Popular applications
• Remote control applications
• Active RFID tags
• Wireless PC Peripherals
• Automated Meter reading
• Home & Industrial Automation
• Security systems
• Remote keyless entry
• Automobile Immobilizers
• Sports & Performance monitoring
• Wireless Toys
• Medical equipment
• Low power two way telemetry systems
• Wireless mesh sensors
• Wireless modules
RF Monolithics, Inc.
4441 Sigma Road
Dallas, Texas 75244
rev04
[phone] toll-free in U.S. and Canada
www.rfm.com Email: [e-mail]
1