H8S-2633 Datasheet, PDF (775/1487 Pages) Renesas Technology Corp – 16-Bit Single-Chip Microcomputer

Section 16 Serial Communication Interface (SCI, IrDA) (The H8S/2695 is not equipped with an IrDA function)
16.2.5 Serial Mode Register (SMR)
Bit
:
7
6
5
4
3
2
1
0
C/A
CHR
PE
O/E STOP MP
CKS1 CKS0
Initial value :
0
0
0
0
0
0
0
0
R/W
:
R/W
R/W R/W
R/W R/W R/W
R/W R/W
SMR is an 8-bit register used to set the SCI’s serial transfer format and select the baud rate
generator clock source.
SMR can be read or written to by the CPU at all times.
SMR is initialized to H'00 by a reset and in hardware standby mode.
Bit 7—Communication Mode (C/A): Selects asynchronous mode or clocked synchronous mode
as the SCI operating mode.
Bit 7
C/A
0
1
Description
Asynchronous mode
Clocked synchronous mode
(Initial value)
Bit 6—Character Length (CHR): Selects 7 or 8 bits as the data length in asynchronous mode. In
clocked synchronous mode, a fixed data length of 8 bits is used regardless of the CHR setting.
Bit 6
CHR
Description
0
8-bit data
1
7-bit data^*
(Initial value)
Note: * When 7-bit data is selected, the MSB (bit 7) of TDR is not transmitted, and it is not possible
to choose between LSB-first or MSB-first transfer.
Rev. 5.00 Mar 28, 2005 page 713 of 1422
REJ09B0234-0500