English
Language : 

S124 Datasheet, PDF (36/98 Pages) Renesas Technology Corp – 32-bit ARM Cortex-M0+ microcontroller
◁
S124
2. Electrical Characteristics
Table 2.11 Operating and standby current (1) (2/2)
Conditions: VCC = AVCC0 = 1.6 to 5.5 V
Item
Test
Symbol Typ*9 Max Unit Conditions
Supply
current*1
Low-voltage
mode*3
Normal mode
All peripheral clock
disabled, code executing
from flash*5
ICLK = 4 MHz
ICC
1.4
-
mA *7
All peripheral clock
disabled, CoreMark code
executing from flash*5
ICLK = 4 MHz
1.4
-
All peripheral clock
enabled, code executing
from flash*5
ICLK = 4 MHz
2.1
-
*8
All peripheral clock
enabled, code executing
from flash*5
ICLK = 4 MHz
-
4.0
Sleep mode
All peripheral clock
disabled*5
ICLK = 4 MHz
0.9
-
*7
All peripheral clock
enabled*5
ICLK = 4 MHz
1.6
-
*8
Subosc-
speed
mode*4
Normal mode All peripheral clock
ICLK = 32.768 kHz ICC
disabled, code executing
from flash*5
5.9
-
μA
*7
All peripheral clock
ICLK = 32.768 kHz
13.0
-
*8
enabled, code executing
from flash*5
All peripheral clock
enabled, code executing
from flash*5
ICLK = 32.768 kHz
-
55.0
Sleep mode
All peripheral clock
ICLK = 32.768 kHz
3.2
-
*7
disabled*5
All peripheral clock
ICLK = 32.768 kHz
10.0
-
*8
enabled*5
Note 1. Supply current values do not include output charge/discharge current from all pins. The values apply when
internal pull-up MOSs are in the off state.
Note 2. The clock source is HOCO.
Note 3. The clock source is MOCO.
Note 4. The clock source is the sub-clock oscillator.
Note 5. This does not include BGO operation.
Note 6. This is the increase for programming or erasure of the ROM or flash memory for data storage during program
execution.
Note 7. PCLKB and PCLKD are set to divided by 64.
Note 8. PCLKB and PCLKD are the same frequency as that of ICLK.
Note 9. VCC = 3.3 V.
Table 2.12 Operating and standby current (2)
Conditions: VCC = AVCC0 = 1.6 to 5.5 V
Item
Symbol Typ*3 Max
Unit
Test conditions
Supply
Software Standby Ta = 25°C
ICC
0.4
1.5
μA
-
current*1 mode*2
Ta = 55°C
0.6
5.5
Ta = 85°C
1.2
10.0
Ta = 105°C
2.6
40.0
Increment for RTC operation with
0.4
-
-
low-speed on-chip oscillator*4
Increment for RTC operation with
sub-clock oscillator*4
0.5
-
SOMCR.SODRV[1:0] are 11b
(Low power mode 3)
1.3
-
SOMCR.SODRV[1:0] are 00b
(Normal mode)
Note 1. Supply current values do not include output charge/discharge current from all pins. The values apply when
internal pull-up MOS transistors are in the off state.
Note 2. The IWDT and LVD are not operating.
R01DS0264EU0100 Rev.1.00
Feb 23, 2016
Page 36 of 95
 ▷