M16C62A Datasheet, PDF (163/242 Pages) Mitsubishi Electric Semiconductor – SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER

Electrical characteristics (Vcc = 3V)
Mitsubishi microcomputers
M16C / 62A Group (80-pin)
SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER
VCC = 3V
Toprble 1.20.19. Electrical characteristics
(referenced to VCC = 2.7V to 3.3V, VSS = 0V at Topr = – 20^oC to 85^oC / – 40^oC to 85^oC(Note 1), f(XIN) = 10MHz(Note 2) with wait)
Symbol
Parameter
Measuring condition
P00 to P07, P20 to P27, P30 to P37,
VOH
HIGH output P40 to P43, P50 to P57, P60 to P67,
voltage
P76, P77, P80 to P84, P86, P87,
P90, P92 to P97, P100 to P107
IOH=–1mA
VOH
HIGH output _XOUT
voltage
HIGHPOWER
LOWPOWER
IOH=–0.1mA
IOH=–50µA
HIGH output _XCOUT
voltage
HIGHPOWER
LOWPOWER
With no load applied
With no load applied
Standard
Min. Typ. Max. ^Unit
2.5
V
2.5
2.5
V
3.0
V
1.6
P00 to P07, P20 to P27, P30 to P37,
VOL
LOW output ^{P40 to P43, P50 to P57, P60 to P67,}
IOL=1mA
voltage
P70, P71, P76, P77, P80 to P84, P86,
P87, P90, P92 to P97, P100 to P107
VOL
LOW output _XOUT
voltage
HIGHPOWER
LOWPOWER
IOL=0.1mA
IOL=50µA
VT+-VT- _Hysteresis
VT+-VT- _Hysteresis
TA0IN, TA3IN, TA4IN,
TB0IN, TB2IN to TB5IN, INT0 to INT2,
ADTRG,CTS0,CTS1 CLK0,CLK1,CLK3,
CLK4, TA3OUT, TA4OUT, NMI, KI0 to KI3,
SIN4, RXD0 to RXD2
RESET
HIGH input ^{P00 to P07, P20 to P27, P30 to P37,}
current
P40 to P43, P50 to P57, P60 to P67,
IIH
P70, P71, P76, P77, P80 to P87,
VI=3V
P90, P92 to P97, P100 to P107,
XIN, RESET, CNVss (BYTE)
0.5 V
0.5
V
0.5
0.2
0.8 V
0.2
1.8 V
4.0 µA
LOW input P00 to P07, P20 to P27, P30 to P37,
current
P40 to P43, P50 to P57, P60 to P67,
I IL
P70, P71, P76, P77, P80 to P87,
VI=0V
P90, P92 to P97, P100 to P107,
XIN, RESET, CNVss (BYTE)
–4.0 µA
Pull-up
RPULLUP _resistance
P00 to P07, P20 to P27, P30 to P37,
P40 to P43, P50 to P57, P60 to P67,
P76, P77, P80 to P84, P86,P87,
P90, P92 to P97, P100 to P107
VI=0V
RfXIN Feedback resistance XIN
RfCXIN _{Feedback resistance} XCIN
VRAM RAM retention voltage
When clock is stopped
The output pins
are open and
other pins are
VSS
Mask ROM
version
Flash memory 5V
version
f(XIN)=10MHz
Square wave, no division
f(XIN)=10MHz
Square wave, no division
Mask ROM
version
f(XCIN)=32kHz
Square wave
66.0 120.0 500.0 kΩ
3.0
MΩ
10.0
MΩ
2.0
V
8.5 21.25 mA
12.0 21.25 mA
40.0
µA
Flash memory 5V f(XCIN)=32kHz
version
Square wave, in RAM
40.0
µA
Icc
Power supply current
Flash memory 5V f(XCIN)=32kHz
version
Square wave, in flash memory
f(XCIN)=32kHz
When a WAITinstruction
is executed.
Oscillation capacity High
(Note3)
800
µA
2.8
µA
f(XCIN)=32kHz
When a WAIT instruction
is executed.
Oscillation capacity Low
(Note3)
0.9
µA
Note 1: Specify a product of -40°C to 85°C to use it.
Note 2: Mask ROM version and flash memory 5V version.
Note 3: With one timer operated using fC32.
Topr=25°C
when clock is stopped
Topr=85°C
when clock is stopped
1.0
µA
20.0
162