M16C62A Datasheet, PDF (156/242 Pages) Mitsubishi Electric Semiconductor – SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER

Electrical characteristics
Mitsubishi microcomputers
M16C / 62A Group (80-pin)
SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER
Table 1.20.2. Recommended operating conditions (referenced to VCC = 2.7V to 5.5V at Topr =
– 20^oC to 85^oC / – 40^oC to 85^oC (Note 3) unless otherwise specified)
Symbol
Vcc
AVcc
Vss
Supply voltage
Analog supply voltage
Supply voltage
Parameter
Standard
Min.
Typ.
Max.
Unit
2.7
5.0
5.5
V
Vcc
V
0
V
AVss
VIH
VIL
I OH (peak)
I OH (avg)
I OL (peak)
I OL (avg)
Analog supply voltage
HIGH input
voltage
P00 to P07, P20 to P27,
P30 to P37, P40 to P43, P50 to P57, P60 to P67,
P76, P77, P80 to P87,P90, P92 to P97, P100 to P107,
XIN, RESET, CNVSS (BYTE)
P70 , P71
LOW input
voltage
P00 to P07, P20 to P27, P30 to P37,
P40 to P43, P50 to P57, P60 to P67, P70, P71,P76, P77,
P80 to P87, P90, P92 to P97, P100 to P107,
XIN, RESET, CNVSS (BYTE)
HIGH peak output ^{P00 to P07, P20 to P27,P30 to P37,}
current
P40 to P43, P50 to P57, P60 to P67, P76, P77,
P80 to P84, P86, P87, P90, P92 to P97, P100 to P107
HIGH average output P00 to P07, P20 to P27, P30 to P37,
current
P40 to P43, P50 to P57, P60 to P67, P76, P77,
P80 to P84, P86, P87, P90, P92 to P97, P100 to P107
LOW peak output
P00 to P07, P20 to P27,P30 to P37,
current
P40 to P43, P50 to P57, P60 to P67, P70, P71, P76, P77
P80 to P84, P86, P87, P90, P92 to P97, P100 to P107
LOW average
output current
P00 to P07, P20 to P27,P30 to P37,
P40 to P43, P50 to P57, P60 to P67, P70, P71, P76, P77
P80 to P84, P86, P87, P90, P92 to P97, P100 to P107
0.8Vcc
0.8Vcc
0
f (XIN)
Main clock input
oscillation
frequency
No wait
with wait
Mask ROM,
Flash memory 5V
version (Note 5)
Vcc=4.2V to 5.5V 0
Vcc=2.7V to 4.2V 0
Mask ROM,
Vcc=4.2V to 5.5V 0
Flash memory 5V
version (Note 5)
Vcc=2.7V to 4.2V 0
f (XcIN) Subclock oscillation frequency
Note 1: The mean output current is the mean value within 100ms.
0
V
Vcc
V
6.5
V
0.2Vcc V
–10.0
mA
–5.0
mA
10.0
mA
5.0
mA
32.768
16
MHz
7.33 X Vcc
–14.791
MHz
16
MHz
4 X Vcc
–0.8
MHz
50
kHz
Note 2: The total IOL (peak) for all ports must be 80mA max. The total IOH (peak) for all ports must be 80mA max.
Note 3: Specify a product of –40°C to 85°C to use it.
Note 4: Relationship between main clock oscillation frequency and supply voltage.
Main clock input oscillation frequency
(Mask ROM, Flash memory 5V versions, No wait)
16.0
7.33 X VCC - 14.791MHZ
Main clock input oscillation frequency
(Mask ROM, Flash memory 5V versions, With wait)
16.0
4 X VCC - 0.8MHZ
10.0
5.0
0.0
2.7
4.2
5.5
Supply voltage[V]
(BCLK: no division)
0.0
2.7
4.2
5.5
Supply voltage[V]
(BCLK: no division)
Note 5: Execute case without wait, program / erase of flash memory by VCC=4.2V to 5.5V and f(BCLK) ≤ 6.25 MHz.
Execute case with wait, program / erase of flash memory by VCC=4.2V to 5.5V and f(BCLK) ≤ 12.5 MHz.
155