AN91184 Datasheet, PDF (30/36 Pages) Ramtron International Corporation – Designing BLE Applications

PSoC® 4 BLE – Designing BLE Applications
4. Select the device “MyThermometer” by clicking on the name, and then click Connect, as shown in Figure 33.
When the BLE Dongle is connected to the BLE device, a new tab with the device name and the BD_ADDR is
added, as shown in Figure 34.
Figure 34. Connect to MyThermometer
5. To discover all the attributes exposed by the Peripheral “MyThermomemeter,” click Discover All Attributes, as
shown in Figure 34.
All discovered attributes are grouped and displayed as shown in Figure 35.
Figure 35. Discovered Attributes
www.cypress.com
Document No. 001-91184 Rev. *B
30