AN91184 Datasheet, PDF (14/36 Pages) Ramtron International Corporation – Designing BLE Applications

PSoC® 4 BLE – Designing BLE Applications
Figure 12. GAP Settings – Advertisement Packet
Keep the remaining settings at their default values including the Scan response packet, Peripheral preferred
connection parameters and Security settings. Also keep the settings in the L2CAP Settings tab at their default
values.
9. Click Apply and then click OK.
10. Place a Digital Input Pin Component and configure it as shown in Figure 13 and Figure 14.
Figure 13. Pin Configuration
www.cypress.com
Document No. 001-91184 Rev. *B
14